Dryers Logo

Related Topics:

Vincent Matthews Posted on Feb 12, 2013
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Dryer hit start button and it hums

I hit the start button and it just hums , sometimes i will turn off and open door and turn drum by hand and then hit start button and it will work somtimes and sometimes it don"t. Do u think I need a new start control button ?

1 Answer

Paul

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Sergeant:

An expert that has over 500 points.

  • Expert 381 Answers
  • Posted on Feb 15, 2013
Paul
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Sergeant:

An expert that has over 500 points.

Joined: May 27, 2009
Answers
381
Questions
0
Helped
146068
Points
960

Sounds like a motor is going bad or you have a sock in the blower fan but if it was a sock, it wouldn't work at all

5 Related Answers

A

Anonymous

  • Posted on Jan 23, 2007

SOURCE: Maytag Neptune Dryer humming but not running

This sounds like the motor is siezed or burned out. I wish I knew how much a motor is, but the Neptune is a good dryer so it would probably be worth it to get a new motor if indeed that's the problem.

Ad

douglas smith

  • 1462 Answers
  • Posted on May 23, 2007

SOURCE: The Drum on my LG DLE2512W Dryer will not turn

no problem with motor or control board. fault is with the motor capacitor only. this is often attached to the motor or near it. the value of the capacitor will be printed on it (usually about 8uf) and you should be able to source from an electrical spares shop

Anonymous

  • 209 Answers
  • Posted on Sep 29, 2007

SOURCE: Electric Clothes Dryer Problem

if the dryer worked fine before with the element not staying on when you open the door, etc, then what you have done is a very common mistake to make, you must have dislodged a wire off, or maybe placed one back in the wrong place, its a very easy error to make, which is why when removing parts for repair on any appliance you must make very detailed notes, better still take digital photographs with a digital camera double check any wires etc, don't worry i am a retired appliance engineer and even we can make this mistake

freetek

Steve Allison

  • 5569 Answers
  • Posted on Sep 04, 2008

SOURCE: DRYER PROBLEM

If the drum isn't jammed, you have probably lost a belt.

Remove the rear panel of the machine and look for tattered remnants of a black belt.

Anonymous

  • 291 Answers
  • Posted on Dec 05, 2008

SOURCE: dryer drum won;t turn

you have a bad motor / sorry to tell you but thats what your looking at / larryyb

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a whirlpool dryer model # LEP6848AW0 and when you hit the start button it just hums like something is binding. Open the door and hold switch in and hit start button it hums and you spin the the drum...

Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor going bad...

Here are a couple of tips that I wrote will help you to figure out why your dryer will not run...

Dryer Repair - The
Dryer is not Turning

Dryer Repair - The
dryer will not start


heatman101

0helpful
1answer

Is making humming noise and drum does not turn.

the noise is coming from the motor,you either have something jammed in the motor or blower wheel stopping the motor from spinning or the motor is bad,try this,open the door,hold the door switch in with one hand and spin the drum with your other hand and have someone else hit the start button at the same time,this sometimes starts the motor but the motor still has to be changed out.let me know what you find and send the model number
Oct 22, 2010 • GE Dryers
1helpful
1answer

Dryer drum turns by hand, belt ok, motor hums but doesn't turn duum.

you have a bad motor,change it out,try this,open the door and put your hand on the door switch and with your other hand spin the drum while somebody else hits the start button,sometimes this will help the motor start but you still need to change it out,easy job to do
6helpful
1answer

Dryer makes loud humming noise but drum doesn't turn when I push start.

Check to see if the drum will turn by hand. If so, leave the door open but push the light switch button down and start the unit. Once you hear the humming sound, manually turn the drum with your hand to start. If the drum turns normally, you have a bad motor and needs to be replaced. If the drum does not turn, something is jamming the motor and needs to be disassembled and inspected.
Good luck
0helpful
1answer

Dryer turns on but does not start when i push the start button. The timer comes on all the buttons light up, light is on inside dryer, but does not start just makes a sound when i hit the start button

if it's a humming sound the motor is bad or something is jammed keeping the motor from spinning.open the dryer door and move the drum by hand if the drum can't be moved the belt could be jammed on something or there's something stuck in the blower wheel.the blower wheel is behind the duct that the lint filter slides into.if you can move the drum then you most likely have a bad motor,try spinning the drum and push the door switch in and have someone else push the push to start button and see if the dryer will start,if the motor has a flat spot it could start like this.let me know what you find
0helpful
1answer

Dryer doesn't run

the motor is going bad..push in the door switch on the dryer,an it start an spin the drum ,it it works,replace dryer motor,or purchase a new open....turn start button,pusn in door switch,spin drum by hand...all at same time....hope this helps...dryer may run a couple of times...good luck...michael..doctor airr appl.repair...843-384-8474....
Mar 26, 2010 • Dryers
0helpful
1answer

The dryer will not run its cycle, the drum does not turn nor does the fan run. However, the timer counts down as though it is running a load. Door is tightly closed and temperature in room is not below 32...

I have a g e dryer modle # dblr333eeocc when i hit the start botton the dryer just hums. If i spin the drum by hand and then hit the door switch the dryer will work untill you open the door
1helpful
1answer

Start problem

Hi,If you hear the hum while you are pushing the start button and when you let off the button the hum stops, you have a notor going bad.
If you can get someone to help you, open the door, hold the door switch in, while someone else holds the start button, you try and turn the drum with your other hand. Sometimes the motor will start but, this only confirms the motor is bad and needs replaced. I hope this helps.

Thanks
Vic
May 15, 2009 • Dryers
7helpful
3answers

When start button is pushed, hums but does not run. Drum does not turn. Belt is okay

It sounds like it is the motor or a stuck/obstructed blower wheel. You can start by opening the door, push the door switch in, hit the start button & see if you can turn the drum clockwise by hand. This might get it going. if the drum does not move by hand then the problem is probably within the blower. post your findings for a follow up
May 01, 2009 • Dryers
0helpful
2answers

When you press the start button the dryer hums and doesnt turn

first thing you need to do is open the door and try to rotate drum by hand it it is not turn by hand that mean there is some thing stack in your blower fan. if you can turn the drum by hand you need two people to check this problem..one open the door there is one push button, push that button and hold now second person need to push the start button when you heard hums sound the turn the drum by hand again if your dryer stat spin that mean you have bad motor. (forgive me for my english)
Apr 18, 2009 • Dryers
Not finding what you are looking for?

120 views

Ask a Question

Usually answered in minutes!

Top LG Dryers Experts

Brad Brown

Level 3 Expert

19187 Answers

Paul Carew

Level 3 Expert

3808 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a LG Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...