Having wifi prob...wifi is conectng but not accessing internet

Theres only three ways to connect to the internet depending on the iPad you have.

Wifi
4G (If you have a 4G iPad)
Hotspot from your phone. Most phones can share your data and create its own wifi network, sharing it to your iPad.

you need to ask customer care to send new settings after installing those u must restart of u r phone

Right click on the wifi icon when it acts up, next click enable, windows will attempt to fix your internet connection automatically.

Yup its have a wifi signal. But you need a wifi router .like mall they have a free wifi or a computer shop. If you want to open your wifi just 12 click menu-setting-connectivity-WLAN-on your wifi then search.then click the available wifi then if say connected.. You can now internet..

If you want to connect to internet there are different ways on how to do it.

1. The first one is to have a wireless broadband modem that you will use to gain signal and access the internet.
2. The second one is to find a Free Wifi Zone where you can access the internet using you Laptop wifi. (This is what i suggest you must do, so that you dont have to spend money to access the internet) but some wifi zone are password protected so be sure to find a open shared wifi.
3. The third one to apply for dsl /lan connected internet that uses ethernet wires that will be connected from the modem to your wifi in able to gain access to internet.

Hope i Help..

do you have wifi? If you don't have wifi it wont connect. Plus if you do have wifi you prob. put a sec code in to block outsiders. so you need that same code to access your wifi

you need to understand two things.
Wifi is a service which requires an access point i.e. a Access point hardware, also known as Wifi Router and A wifi enabled phone. As you hve mentioned that you have corby- pro, it does have a wifi chip to access the wifi signal. Now you must get a wifi access point, i.e. a Wifi router, d link has veriety of routers, Now connect the router with broadband internet line and enable it. Configure the router through your desktop.
Now switch on the wifi on the corby pro and establish connection between the wifi router and corby . Then only you will be able to connect with internet..

All you have to do to the ipod is go to settings, wifi and make sure its turned on in the same place you should see a list of wifi networks you can connect to just tap the one you want and the ipod will do its thing your done, but if you done all that and you ipod doesnt go online says connected but wont access the net, my guess is the wifi router you mite have some prob with that, make sure the internet ethernet cable is pluged into the modem plug not the numbered slots after this you should be good to go unless your wifi modem is new if so some req you to plug it to your computer via ethernet cable to program it first! Hope this helps

Ok, if you are having this prob. you should goto support.nintendo.com and enter the code in the error box. or if you already have and it didn't work, put your wii's serial number in the repair/serial part and before you confirm that, check your warranty.

Then the NWC (Nintendo Wi-Fi Connector) needs to be set to 11