Installation error 1158 - Microsoft Flight Simulator X

The 150-1158-51 is one of the part numbers that is described as the CARS51 by ADC. It is not the newest number. Alpine Computer stocks these remote desktop units and their interface cards. The number is 800 456 2128

Hello
Four digit remote codes for Telifunken TV with Ellies unversal remote are:

1180 1200 1215

1197 1165 1258

1239 1198 1036

1194 1289 1331

1052 1217 1202

1158 1039 1160

1214 1285 1269

1301 1376 1157
1123 1232 1051
ok.

Hello
Remote cuitable for Sharp tV is RCA RCR 311B. Codes are:
1004, 1007, 1009, 1015, 1023, 1078, 1083, 1094, 1107, 1123, 1125, 1158, 1182, 1195
OK.

hi! i have here a couple of codes here for your toshiba, just try them,1154, 2093, 3099, 1158, 2094, 3098, 1338, 2094, 3149,1116, 2054, 1293, 2210, 1294, 2210, 1345, 2231, hope this helps!!!! goodluck!!!

These are RCA codes:
1158, 1157,1154,1150,1149,1148,1147,1146,
1145,1144,1143,1137,1132,1131,1130,1125,1124,1098,
1081,1055,1016,1011
I don't which may work for you. If nobody else replys, trial & error.

number one reason for HDD failure is HDDs were made only
for the actual data storage , there is only one type of failure
on an HDD and that is the image that is placed on the HDD
by the RAM becomes corrupt , any and all other errors come
from an HDDs proprietary software such as one touch which
never works because the firmware of the HDD is grossly out
of date , they pretty much come new out of the box with
out of date software .

Hi
1021, 1016, 1026, 1049, 1051, 1052, 1082, 1091, 1098, 1132, 1141, 1157, 1158, 1175, 1203, 1206, 1217, 1225, 1231, 1258, 1274, 1275, 1288, 1347, 1355.

Regards
Phillip

Hi, for T.V 1004, 1051, 1052, 1061, 1065, 1075, 1083, 1087, 1091, 1102, 1104, 1105, 1106, 1107, 1132, 1157, 1158, 1189, 1203, 1206, 1210, 1251, 1274, 1287, 1337.
DVD/VCR Try?! 2004, 2009, 2032, 2034, 2037, 2054, 2056, 2057, 2302, 2307, 2310,2314, 2318, 2319, 2326, 2327, 2330, 2340, 2342, 2345, 2356, 2357.

Regards
Phillip

We have a 1 yr old Bosch wash machine w/o problems till now. We have a problem with the centrifuge program-it does not start, although the machine can spin slowly. Is it a motor problem or a problem with the programmer? Thanx for the help in advance!