Question about Roland Boss Gt-10 Guitar Effects Processor Gt10 Open

3 Answers

Fix a Boss GT-10 broken input jack - Roland Boss Gt-10 Guitar Effects Processor Gt10 Open

Posted by Anonymous on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 25 Answers

There should be a skinny nut on there so that has to come off and the jack is soldered in so heat up the solders and pull the wires off but mark them so you no for sure were they go when you install the new one . for install just go backwards from the steps to take it out. you will do fine but if you cant solder i would suggest repairman cause to much heat and things go wrong.

Posted on Sep 27, 2019

Ad

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 56 Answers

Repair or replace input jack.

Posted on May 06, 2019

Ad

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 13 Answers

What is your question?
if not working, you have to open the device and find out where it is not connecting (broken solder joint? bent or worn out contacts? wire off?) and repair. or if beyond repair, order a new part.

Posted on Apr 13, 2017

  • NOSA
    NOSA May 03, 2019

    HI, please where can I order a new part (DC input jack) for BOSS GT-10

×

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i plug the cable in my boss rc-20 it turns on and instantly it turns off, how can i fix that?


I would suggest cleaning the input jack, and if that doesn't fix it, replacing the jack.

Apr 22, 2016 | Roland Boss RC-20XL Loop Station Twin...

1 Answer

The XLR-input distorts very fast


XLR inputs often have a pad (attenuator) that is switchable for signal level.

May 23, 2017 | Boss Rc 50

1 Answer

Hello. I have a Boss MT-2 distortion pedal. It will not power up with the adapter or battery. Wondering what could be wrong. Any suggestions on what to look for? Thank you!


The battery is connected via plugging in the input guitar cable ( a seperate contact is made at the jack). Sometimes this can be broken. Usually this failure is caused by someone stepping on or yanking a cable and the solder is broken at the jack/board attachment. This can be the input jack OR the power jack. Occasionally the circuit board or the traces on it are cracked, requiring jumpers to be installed on the board. In any case, open the pedal and look for these problems.

Aug 15, 2011 | Boss Mt 2 Metal Zone Effects Pedal

1 Answer

So when I'm using this RV-5 reverb pedal, input A seems to be fuzzy and give out a faint B flat like it's not connecting but i still get sound through it. It also pops and crunches A LOT when you...


Open and look for broken solder at the jack... common occurence when people step on plugs or cables going into these. Also look for circuit board cracks around the connector and also around the power input connector.

Jul 07, 2011 | BOSS AUDIO SYSTEMS Boss Rv 5 Digital...

1 Answer

My OS-2 Distortion pedal will not work. There is current flowing to the battery terminal, there is also contact noise in the output, but none in the input. The red light does not come on when powered and...


Common problem is a broken solder connection where power jack is attached to the circuit board. SOmetimes the circuit board is cracked or solder broken. If board is cracked, jumpers need to be soldlered on to bridge the crack.

May 07, 2011 | Roland Boss OS-2 Overdrive / Distortion...

1 Answer

I have a Boss GT -10 and its great. When I plug in my Gibson les paul into it and play it, there is sound. When I plug in my Other les paul with emgs in it, no sound comes out. I plugged them both into...


The half-way cord is the clue. Read up on unbalanced and balanced lines and TRS connectors.
One of these requires TRS connections and the signal is being carried on the RING of the TIP-RING-SLEEVE connector. Plugging in half-way the TIP touches the ring pickup contact. The emgs one MAY use TRS type cables and there may be a reason the signal and hot of these are reversed. If I could find schematics on all this equipment I could unravel the exact cause. You could make an adapter with a Stereo 1/4 inch plug and a 1/4 inch jack by wiring it to swap the tip and ring between them to use for connecting to the emgs guitar. ALSO verify you are using the SAME type guitar cable for both.OFTEN a TRS cable will NOT turn on the electronics when plugged into a guitar. Use an unbalanced instrument cable unless you have the XLR type output. Use of an adapter from the XLR type cable into the Boss will usually not work.

Apr 24, 2011 | Roland Boss Gt-10 Guitar Effects Processor...

1 Answer

Hi :) I have a problem with my Boss mt-2 pedal. Whenever I insert the jack plug in the input, the adapter switches off automatically. The pedal works fine with battery and no problem is created. This only...


Make sure you are NOT using a TRS (stereo or three conductor cable) type cable. PLugging into the input should turn the pedal ON, not off. The switch on the jack may be broken or soldering to the circuit board may be broken OR worst case, there is a crack in the circuit board.

Mar 16, 2011 | Boss Mt 2 Metal Zone Effects Pedal

1 Answer

How do plug your guitar into the boss rv3 which jacks


Plug your guitar into the input and a cord from one or both outputs to the inputs of whatever you are using. Meant to be run in stereo for best sound. Two guitar amps?

Sep 24, 2010 | BOSS AUDIO SYSTEMS Boss Rv 5 Digital...

1 Answer

BOSS DD3 STAYS ON AND WILL NOT TURN OFF


It's supposed to do that. An extra lug on the input jack is connected to the battery and/or power supply's ground.

So the only way to power off any pedal is to disconnect the input jack. If you use a power supply and power multiple pedals you can simply disconnect the power supply to cut power and avoid unplugging each one.

Oct 08, 2009 | Boss Music

Not finding what you are looking for?
Roland Boss Gt-10 Guitar Effects Processor Gt10 Open Logo

Related Topics:

302 people viewed this question

Ask a Question

Usually answered in minutes!

Top Roland Music Experts

Michial Gueffroy

Level 3 Expert

1140 Answers

Cameron Lewis
Cameron Lewis

Level 1 Expert

64 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Roland Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...