Hello
I turned on machine & the wrench sign is lit up. It says error sending email. We dont use it for email, only copy & print. The code on screen says sc865 but on top it says call service sc873. I did the clear mode 107 & held down clear. I did this a few times but it still comes up. Anyone who can help?
Thanks
These SC errors are related to the Hard disk.
Re - enter SP mode: Clear, 107 and press and hold Stop button for 3 secs.
Enter SP 5832-008 and press #,(Mail Tx data) to initialize the HDD. Then switch off and on the machine.
If still with error, replace the HDD.
Attention not to change any others SP modes - very sensitive settings!
Good luck and please rate me, thanks.
623 views
Usually answered in minutes!
Thanks very much. It still has a problem so a new HDD must be in the works.
Thanks again
×