Since last week the answer ''on'' light just keeps flashing and it doesn't works when somebody calls me. I have tried unplugging and replugging but it just keeps flashing.

Heres another tip. The answering system settings are locked with a default code. try this (111). this may be the reason why it wont let you in to the option so you can turn it off. Someone may have set this default code. (111)

Remote code
A remote code must be entered when
operating the answering system
remotely. This code prevents
unauthorized parties from listening to
your messages remotely. The default
setting is “111”.
1 {MENU}
2 {V}/{^}: “Answering device” i
{OK}
3 {V}/{^}: “Settings” i {OK}
4 {V}/{^}: “Remote code” i {OK}
5 Enter the desired 3-digit remote
code. i {OK} i {OFF}



Heres another tip. The answering system settings are locked with a default code. try this (111). this may be the reason why it wont let you in to the option so you can turn it off. Someone may have set this default code. (111)

Remote code
A remote code must be entered when
operating the answering system
remotely. This code prevents
unauthorized parties from listening to
your messages remotely. The default
setting is “111”.
1 {MENU}
2 {V}/{^}: “Answering device” i
{OK}
3 {V}/{^}: “Settings” i {OK}
4 {V}/{^}: “Remote code” i {OK}
5 Enter the desired 3-digit remote
code. i {OK} i {OFF}

The included handset and base unit are
preregistered. If for some reason the
handset is not registered to the base
unit, register the handset.
1 Handset:
{MENU}
2 {V}/{^}: “Handset settings” i
{OK}
3 {V}/{^}: “Registration” i {OK}
4 {V}/{^}: “HS registration” i
{OK}
5 Base unit:
Press and hold {LOCATOR} until
the registration tone sounds.
LIf all registered handsets start
ringing, press {LOCATOR} to
stop, then repeat this step.
LAfter the base unit beeps, the rest
of the procedure must be
completed within 1 minute and 30
seconds.
6 Handset:
Press {OK}, then wait until a beep
sounds and w stops flashing.

The included handset and base unit are
preregistered. If for some reason the
handset is not registered to the base
unit, register the handset.
1 Handset:
{MENU}
2 {V}/{^}: “Handset settings” i
{OK}
3 {V}/{^}: “Registration” i {OK}
4 {V}/{^}: “HS registration” i
{OK}
5 Base unit:
Press and hold {LOCATOR} until
the registration tone sounds.
LIf all registered handsets start
ringing, press {LOCATOR} to
stop, then repeat this step.
LAfter the base unit beeps, the rest
of the procedure must be
completed within 1 minute and 30
seconds.
6 Handset:
Press {OK}, then wait until a beep
sounds and w stops flashing.