I restor the notebook MPC X1000 to DEFAULT

You can remove or change the Window's User or administrator's password and privileges. You need access to a computer with Internet access to download the Hiren's Boot CD and burn it onto a CD. Then insert this CD into the laptop/computer and boot up the laptop/computer with the Hiren's CD and follow the instructions. There are very useful utilities CD and it a Linux boot CD which contains quite a lot of Utility programs including a password removal program. Click on one of these links to download HIREN'S BOOTCD :- http://www.hirensbootcd.net/ http://67.20.82.163/

BIOS passwords can be reset or removed in two ways:

1. using software 2. using hardware.

I would first try resetting or removing using software, here are two software apps to reset or retrieve BIOS passwords.

!BIOS - is a PC BIOS toolkit offering password removal/decrypt and BIOS settings modification/backup/restore.
You can download it here:
http://www.syschat.com/download120.html&act=down

CmosPwd - Cmos password recovery tools
http://majorgeeks.com/CmosPwd_d239.html

You will need to create a bootable Dos, or Linux or NT cd in order to run them.

Good Luck!

during the boot up process you will see on the screen for a short amount of time press a certain key to enter set up
Press and hold that key during the boot up process to enter BIOS scroll down to set user password or supervisor password you can change or remove your password from there

hope this helps

Restart the computer.
Enter BIOS SETUP.
Enter the current BIOS password.
Set the new password to "blank".
Save/Exit from BIOS SETUP.

There is no specific unlock code that you can use to bypass this password but I would suggest that you first try and clear the password and then call the manufacture if that dose not work and they should be able to help you. I have attached a link to a tutorial on how to bypass this type of password.

http://www.technibble.com/how-to-bypass-or-remove-a-bios-password/

I hope this helped.

Thank you,
Norse

Yes they are right. There is NO way that it can be fixed OTHER than returning it to the manufacturers or agent. They have proprietory Software Challenge Codes and this will do the job. However they charge for this usually around $125. Also one must provide proof of purchace and ownership.

try to find a small batery inside netbook you find-it behind keybord or nerby cpu. you disconnect baterry about 10min. ALL THIS PROCEDURE WITHOUT BATERY AND MAIN CHANGER.

Note: All user bios config, are reset. You must config again.

I just purchased a used MPC x1000 and encountered the same problem. Here's what I did:

First, turn on PC and press F1 to enter CMOS.
Go to the Security tab. There you will see Supervisor and User Password fields. Change the Supervisor password, then the User fields can be changed. Then, save and exit.

If, when your o/s boots, the screen asks for password or touch fingerprint pad, go for the password option by pressing ctrl/alt/del.
If that won't let you in, there's a bypass tab that you can select. I clicked on that tab and went right into Windows no prob. Then, the TouchPad options menu appeared so I could set up security as I choose.

Good luck

the best way to remove a bios password is to have the bios reset by a program called "winternals" this can be done by any pc repair shop

The new mpc support site is back online at http://www.mpcdrivers.com
Mpc notebooks have a bios password ability. Once that password is set, you cannot log into the pc without it. The only method is to have a repair shop replace the bios chip with a new one.
There is no password utility that will bypass this.