HOW TO PROGRAM GE RC24911-A REMOTE CONTROL DOING CODE SEARCH

It seems that GE remote control have no set-up code to Magnavox devices. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Visit some online sites too, which deals with electronic spare parts.

GOOGLE GE UNIVERSAL REMOTES.FIND YOUR MODEL.CODES AND MANUALS FOR DOWNLOAD WILL BE THERE.

Hi

Manual code entry

1.Turn on your television or other electronic component that you want to program the remote control for.

2.Hold down the "Code Search" or "Setup" button until the LED indicator light turns on.

3.Hit the button for the component that you are programming (TV, DVD, VCR, etc.). The LED light should flicker and stay on.

4.Enter the 3-digit or 4-digit code that corresponds to the TV or device that you're operating.The LED light should go off if the code is valid, but will flash if it is not. Try other codes you have.

5.Try turning the television or other programmed component off to ensure that the remote works properly, once the light has gone off.


Auto configuration


1.Turn on your television or other electronic component that you want to program the remote control for.

2.Hold down the "Code Search" or "Setup" button until the LED indicator light turns on.

3.Hit the button for the component that you are programming (TV, DVD, VCR, etc.). The LED light should flicker and stay on.

4. Press and release the "Power" until the television or other component turns off while waiting at least 2 seconds between each press.

5.Press "Enter" or "Save" once the remote has effectively turned the power off. The LED light will shut off and the remote will now operate the device.


You can get your codes for your device from below website

http://www.jascoproducts.com/support/universal-remote-codes.asp

Thanx

I have a Comcast cable box and a rc24911-E remote I lost the code list can you help?

HOW TO PROGRAM GE JASRM24912 Remote Control DOING CODE SEARCH


1. turn on device 2. press setup (underneath on/off) till red light stays on the take finger off the button 3. press and quickly release device button (tv,vcr,etc.) the red indicator blinds off once 4. press the on/off button (up to 300 times) until the device is to be controlled turns off the red light blinks off with each button press 5. press and release enter to install code

Call the manufacturer to your tv and ask them for a remote code for that particular universal remote.

rc24911-e remote controll code

HOW TO PROGRAM GE JASRM24912 Remote Control DOING CODE SEARCH


1. turn on device 2. press setup (underneath on/off) till red light stays on then take finger off the button 3. press and quickly release device button (tv,vcr,etc.) the red indicator blinds off once 4. press the on/off button (up to 300 times) until the device is to be controlled turns off the red light blinks off with each button press 5. press and release enter to install code.

Hope this works for you

HOW TO PROGRAM GE JASRM24912 Remote Control DOING CODE SEARCH


1. turn on device 2. press setup (underneath on/off) till red light stays on the take finger off the button 3. press and quickly release device button (tv,vcr,etc.) the red indicator blinds off once 4. press the on/off button (up to 300 times) until the device is to be controlled turns off the red light blinks off with each button press 5. press and release enter to install code

http://www.jascoproducts.com/support/universal-Remote-codes.asp

this is the site for all ge remote codes.