Panasonic TC-P54S2 red light 8 times

Page 50 and 53 of the Service Manual

https://www.manualslib.com/manual/2311596/Panasonic-Tc-P55vt60.html?term=3+blinks&selected=3&page=50#manual

3 Blinks
Yes
A1 and disconnect the
Blinking
Is the power LED
3 times
off or is it blinking 3
times continuously
at a fast pace ?
Replace the
K board
Applies to Models
TC-P55VT60
TC-P60VT60
List of boards likely to cause this
symptom.
No specific order
P, SS SC, A, K, Bluetooth module,
Cs, Panel


..

http://service.us.panasonic.com/OPERMANPDF/TCP42C2.PDF
you need a new ss board,


blimking light diagram,

With 10 blinks it could be any of the following boards, the blinks tell you that is is a power problem

A-Board TXN/A1LPUUS
SC-Board TXNSC1LPUU
SS-Board TXNSS1LPUU
P-Board ETX2MM806ASH

If this is a CRT TV, the problem is in and around LOT area or on the RGB driver in CRT PCB.

Hello,
Your TV 7 blinks indicates you have a faulty ss board its bad or needs service SS Board (SS Data Energy recovery and data driver). So check ss board for faulty components.
i think it helps
Thank you for using fixya

Chandrashekhar Bhat

thought I would post this here for everyone.

1 blink STV 5v sense DG Board

2 blinks 15v SOS D Board

3 blinks 3.3v SOS D Board

4 blinks Power SOS P Board

5 blinks 5v SOS D Board

6 blinks Driver SOS 1 SU / SD / SC Boards
(SC energy recovery circuit)

7 blinks Driver SOS 2 SU / SD / SS Boards
(SC floating voltage area)

8 blinks Driver SOS 3 SS Board
(SS energy recovery circuit)

9 blinks Panel Config. SOS

10 blinks Sub 5v SOS / Main 3v SOS DG Board
DTV 9v SOS / Tuner Power SOS

11 blinks Fan SOS PB Board

12 blinks Sound SOS H Board

13 blinks Communication error DG Board
with IC8001 (Pesks Lite 2)

Here are all the Panasonic blink codes.
1 blink STV 5v sense DG Board

2 blinks 15v SOS D Board

3 blinks 3.3v SOS D Board

4 blinks Power SOS P Board

5 blinks 5v SOS D Board

6 blinks Driver SOS 1 SU / SD / SC Boards
(SC energy recovery circuit)

7 blinks Driver SOS 2 SU / SD / SS Boards
(SC floating voltage area)

8 blinks Driver SOS 3 SS Board
(SS energy recovery circuit)

9 blinks Panel Config. SOS

10 blinks Sub 5v SOS / Main 3v SOS DG Board
DTV 9v SOS / Tuner Power SOS

11 blinks Fan SOS PB Board

12 blinks Sound SOS H Board

13 blinks Communication error DG Board
with IC8001 (Pesks Lite 2)























7 blinks Driver SOS 2 SU / SD / SS Boards
(SC floating voltage area)

8 blinks Driver SOS 3 SS Board
(SS energy recovery circuit)

9 blinks Panel Config. SOS

10 blinks Sub 5v SOS / Main 3v SOS DG Board
DTV 9v SOS / Tuner Power SOS

11 blinks Fan SOS PB Board

12 blinks Sound SOS H Board

13 blinks Communication error DG Board
with IC8001 (Pesks Lite 2)

8 blinks Driver SOS 3 SS Board
(SS energy recovery circuit)
Thanks for using Fixya