How to reset hp photosmart R727?? pks help me

Hello,
Normaly the repair service reset camera by using special file on the SD card.This file is impossible to find it on the internet.But you can try to update FW maybe it will help to this error message.You can try download lates FW for R727 from google.(Last FW version is 3.02.15).
Then extract exe file and copy FW file to the SD card.Put SD card into the camera and close battery door.Hold Shutter button and power on camera.After FW update is complete just power off camera.Then try it again to swith on.If it will not help the only way is send camera into the repair service.

Best Regards
AIOS

Two ways: 1. Go into the menu and find "reset"...follow the on-screen instructions. 2..Remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on.

Remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on.

With the battery in, use a small paperclip and stick it in the hole next to the battery compartment. This is a reset button. If that does not work, close the battery cover and give a good medium smack against your leg. I know that sounds crazy but it works about 9 times out of ten with the HP cameras.

ftp://ftp.hp.com/pub/softlib/software8/COL18696/ps-49082-1/col18696.exe
here is a link with the driver and software you need to manage this camera...I assumed that you use a XP operation system ...but on the ir page there are downloads for all operating system in use on a large scale ...
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&lang=en&product=1154630&
this second link is for another OS if you need...
anyway ..just install and use its software to doenload...or ...just look for the camera into teh My computer folder after driver installation and restart ...when you plug the camera it should also ask you for a action ...with the autoplay ..or lounch the software auto ,,for downloading the picks ..

HP R727 and HP R749 use different batteries. R727 battery charger is @ http://www.ebuybatteries.com/product/battery_chargers/HP/HP-L1812A-AC-charger.htm while R740 battery charger is @ http://www.ebuybatteries.com/product/battery_chargers/HP/HP-LI40-AC-charger.htm .

The reset button is located next to the battery release tap. Here is a picture (sorry for the lousy quality, it was taken with a ten dollar web cam.)

**** hp

Try holding in the reset button longer then the recommended 6 seconds.
I've fixed many of these Photosmart series this way.

Dagra

it wont open when power is turn on,i keep getting ,(camera has experienced an error)(please reset your camera)this number accompanies the message-00000018-4489-957-000,ive read the manuel nowhere does it say how to reset, help ?