Samsung LA26R71BD 26 in. HD-Ready LCD TV Logo
Posted on Feb 24, 2009

"Weak or No Signal" message on Samsung 26" LCD TV

Why is it that more often than not, I get the "Weak or No Signal"message on some of my channels? I am hooked up to cable (no box -- just have it for the reception). I tried the cable setting, as well as the TV setting. Didn't have this problem with my old analog 13" television It is VERY frustrating! The TV has a mind of its own!

  • Scott Frye
    Scott Frye May 11, 2010

    Hi....
    Are you using the chrome screw-on type connect for the cable?
    Does the one on the TV seems loose and, have you tried a new cable between the cable box and TV yet?

    Let me know


×

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Nov 07, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Apr 26, 2009
Answers
1
Questions
0
Helped
3328
Points
2

I pressed mute on my television and about 5 minutes later it said weak or no signal.What do I do?

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Why do I loose the signal on channel 26 only?

sounds like a weak signal might help if your antenna was on a mast for a better reception
0helpful
1answer

There is a message on the screen that says "Weak or no signal".

Tv it is not getting the tv stations broadcasting incomming signals.Make sure the ur pay CABLE or free AIR incomming broadcasting tv stations signal sources are good and than go in ur tv menu go into SETUP pick AIR or CABLE and rescan channels again.U should have no more weak or no signal message anymore.
1helpful
3answers

Samsung LCD TV ''Weak or No Signal''

try swicth cable box for testing....if sam problem..need replaced tv main board
0helpful
1answer

I get a 'weak or no signal' message and can't get an AV2 choice at all , just 'free to air' tv channels

reception issues require a better signal source, attic or roof antenna should solve your dilema
Samsung should stop at AV2 when something is plugged in the correct socket, if it doesn't check for a bad cable.
E

I’m happy to help further over the phone at https://www.6ya.com/expert/eric_ab7c09ec01841771

0helpful
1answer

Signal interruptions on digital TV set

Weak signal is a weak signal, so not sure what if anything you can do. Buy a satellite subscription???
0helpful
1answer

Digital - Weak or no signal digital coax when hdmi dvd player on

if u have placed your DVD next to your tv ... just maintain distance between then and check out
38helpful
3answers

Weak or no signal message

  1. Since my problem (Samsung/Comcast) began with a channel selection button pushed on the TV remote when it should have been pushed on the cable remote, I figured the problem lay with the TV.  Although I was getting the "weak or no signal" msg., the actual signal strength bar graphic showed it to be strong. Disconnecting did no good. I surmised that the TV was simply not recognizing the box.
  2. I looked at the manual for my Samsung 750 model. 
  3. Page 20 discussed "Selecting the source". I accessed the TV menu and selected "Input", then chose the "HD..." item from the highlighted list. Voila! My tv works again. 
0helpful
1answer

Weak or no signal message

Is this a joke? How am i suppose to get help?
Not finding what you are looking for?

3,338 views

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...