Ricoh sp1200 drum error even after end toner life

Drum motor error;
The machine detects a lock signal error from the drum motor for 2 seconds after the drum motor turned on.

• Overload on the motor
• Defective drum motor
• Defective harness
• Defective IOB

Try removing the drum and turning the gears.

it does don to be the problem that the toner is oem. you have passes the drums life, and the drums need t be replaced.

Reset yes, did you actually replace the drum? -Carl

HOW TO CHANGE GEAR OF CARTRIDGE FOR RICOH SP1200s PRINTER

why toner life end message keep on showing on sp 1200s prints.

-open front cover
-press 'Option' button
-then key *00 on the keypad
-This resets the device so it knows it has had a new cartridge.

I hope it helps

1>If the toner lite is blinking , it's mean the toner life near to end. In these case please replace the toner cartridge.
2>f the drum lite is blinking , it's mean the drum life near to end. In these case please replace the drum.
I hope it will help to solve your printer problem.

Did you follow the instuctions to shake gently then remove all tags prior to placing the toner? Is it a toner/drum unit. look underneath if theres a green drum. After market toner will not work.

hold cancel button down with door open, this should rest it