GE top load washer - how to get agitator out of tub?
I had this same problem with our GE top load washer. I just needed to pull harder. (Note: The agitator is held in place by about a dozen L-shaped clips in a ring around the agitator's base that will release more as you pull harder on the agitator.) Everything from the base below the large fins on up comes out together. Grab the shaft above the fins and pull slowly and hard. I had to take the entire tub out, lay it on the porch, put my feet inside of it, and pull the agitator assembly out. I wasn't able to pull it out while it was still in the washer. BE CAREFUL! DON'T **** IT OUT; that might injure your back; just pull out slowly and as hard as you can without hurting yourself. I was able to get it out successfully, but I am currently stuck at removing the bell below the agitator. Good luck!
1,218 views
Usually answered in minutes!
Washer Spinning But not Agitating!
I have a Top Load GE washer model S3700E1WW. The agitator does not work. It rinses and spins but does not agitate
The agitator fin fell of during washing, I hear the screw in the fin. How can I get to it???
TOP LOAD washer shuts off mid cycle
when motor is reversing
×