Ryobi Two  18V Lithium-Ion Batteries + Lithium-Ion Charger Upgrade Combo Pack Logo

Related Topics:

A
Anonymous Posted on Feb 23, 2018

I have about fifteen RYOBI P103 batteries which when placed in the charger do exactly what they are supposed to do as far as the red light blinking and then the green light blinks for about 2 minutes and turns a solid green indicating a full charge but has no charge. What causes this?

2 Answers

Zen michael

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Nov 24, 2020
Zen michael
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Nov 24, 2020
Answers
1
Questions
0
Helped
1399
Points
1

If you have a lithium + hp 18v charger it will not charge a lithium 18v battery .just learned this .kind think it's bs

christiaan saayman

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

New Friend:

An expert that has 1 follower.

  • Expert 132 Answers
  • Posted on Feb 23, 2018
christiaan saayman
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

New Friend:

An expert that has 1 follower.

Joined: Jul 17, 2017
Answers
132
Questions
6
Helped
43420
Points
310

Check output on transformer, 2 check pcb ,could be a regulator

Ad

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Jan 03, 2010

SOURCE: ryobi battery charger with a solid yellow and solid green light

I was recently told that the lithium ion does not like cold temperatures so you may need to bring the batteries and charge into a warm location and wait until they reach a warm temperature and then charge them.

Ad

Anonymous

  • 1 Answer
  • Posted on Nov 02, 2007

SOURCE: Ryobi Model 1412001, 16vdc, 2A

I've open the charger and found that Q4 is open. But they have removed the part number from the component so you can't get a replacement.

joboo1

Jim London

  • 257 Answers
  • Posted on Feb 05, 2009

SOURCE: Ryobi 18V lithium battery won't charge

Hi, Thanks for getting back to me. The yellow and blinking red indicate a defective cell. Since it has lithium cells and is that new any repair to it would be a waste of your time. Ryobi tools purchased in 2008 have a 2 year warranty. I am guessing you probably got it at a home depot and you should return it under the warranty. All new Ryobi tools have a three year warranty. Good Luck! and Thanks for using fixya!

Anonymous

  • 83 Answers
  • Posted on Aug 13, 2009

SOURCE: Can I leave my Ryobi P113 charger with a P103

Yes you can that is an automatic charger when it is fully charged it shuts down the charging portion but keeps the charged light lit however this does not effect the battery.

Anonymous

  • 111 Answers
  • Posted on Mar 16, 2010

SOURCE: ryobi 18v lithium battery won't charge

sound to me like you have a bad battery, a lot of ryobi batterys don't last like they should i have had the same problem, but my battery was less than a year old and i took it back and they give me a new one.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

I bought a 18v ryobi hedge trimmer it came with a p102 battery, I had 2 p103 batteries why won't the p103's work in my hedge trimmer?

I do not know, but I have looked at generic battery versions as copies of those two and they seem one and the same in most respects.
So my thought is do they charge up? do they power anything else OK?
Then I would look at the contact areas to see if there is a difference like one has a longer contact or some bit of plastic is on one or not the other.
Many types I have found start out as specific, then over the years manufacturers sell out of older model types then decide to unify whats left to cover a slew of older models.
If charging is the issue then it is a real problem as these modern batteries require exact charging and if its controller finds a battery is below a safe charge up level point they become a brick.
Do not try to "fix" them as methods used on "tolerant" Nicad types to get them to work, is not safe on them they have a BAD reaction to overcharge situations.
If they are not that old maybe you can do a swap deal with Ryobi?

Hope this helps..........
0helpful
1answer

No light on charger when plug in battery to charge? Charger No. 1423701 with p103 battery. thanks

Two things come to mind (1) there is a short in the charger or (2) the light is simply out.
0helpful
1answer

No light comes on my charger when i plug in my new p103 battery into charger no 1423701?

does the outlet work that the charger is plugged into... is the battery completely dead and the charger can't see it... is the charger even plugged in... or is it even any good ???
1helpful
1answer

Is there a difference between the ryobi p103 lithium battery and the ryobi p106 lithium battery?

p103 is name of the battery. p106 is the kit with 2 p103 batteries. same thing just 2 times. the p104 however is bigger and holds more juice.
1helpful
2answers

I bought 2 P103 lithium batteries and they will not take a charge from my one + (p110) charger. I was informed that these components are all interchangeable. Will the P103s work with the blue 18v ryobi...

That is true the One+ 18V Li-Ion battery packs will work in any One+ 18V Ryobi tool. However the Lithium ion batteries will not charge in the original P110 NiCd charger. You will need one of the the new series Ryobi One+ 18V "dual chemistry" chargers for that. The will charge both types of battery packs.
2helpful
1answer

What Ryobi batteries p103 or p104 will a battery charger that came with my p100 batteries charge? Or will the charger work with these batteries?

If you have a P100 NiCad battery, the charger for that will not charge the new Lithium Ion P103 or P104 batteries. You need a specialised Ryobi Lithium Ion battery charger like this one
0helpful
1answer

Ryobi p103 battery charged but dosen't work.

You need to have the charger tested, if you know that batteries are good then what else could it be. This LIon charger has a logic circuit in it like a computer.
0helpful
1answer

Have a p103 battery that was in the p113 charger overnight and don't think it ever got out of the testing phase. The only difference was that the red light would flash about 5 or 6 times then stay on...

If you are sure your charger is working properly then your one battery may be shot.. i even had a new battery quit charging and had to replace it. they do not come cheap.
3helpful
1answer

Can I leave my Ryobi P113 charger with a P103 battery inserted in it for an indefinite amount of time with the charger plugged in, without doing damage to the battery or charger? Thank you. Phil

Yes you can that is an automatic charger when it is fully charged it shuts down the charging portion but keeps the charged light lit however this does not effect the battery.
3helpful
2answers

Ryobi lithium batteries won't take charge

For others with the same problem (flashing red light won't go off)...make sure you FIRMLY PUSH the battery down onto the charger and engage the latches. Simply resting the battery on the charger will not work.
Not finding what you are looking for?

1,409 views

Ask a Question

Usually answered in minutes!

Top Ryobi Drills Experts

Cindy Wells

Level 3 Expert

6688 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66824 Answers

Are you a Ryobi Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...