On a kenmore front loader dryer what does the flashing PF mean. It will start for 1 second then flash this code. Cant seem to find out what the code means. Anyone know???? Thanks Becky

Let's guess it is a Maytag Dryer :>/
'Make model (what it is) in all questions please.

A PF (Power Failure) error code indicates that the drying cycle has been interrupted by a power failure. Touch and hold START to restart the dryer cycle or press POWER to clear the display.
Dec 14, 2019

PF - Error Code - Dryer - Product Help - Maytag

try unplugging it from power or tripping the circuit breaker(which might be easier). then re energize it and see if it resets. good luck.

Hi,

Here is a tips that I wrote that will help to explain why you get the PF Error Code

PF Error Codefor Appliances
heatman101

Hello & Welcome to FixYa

PF error means power failure which is generally caused when the control board inside the unit goes bad. You can try unplugging the unit for 15-30 minutes, if the issue returns then the control board needs replacement. Please get back to me if you have any other questions.

Kevin

PF - Power Failure - PF error code indicates a power failure during the dryer's cycle.
Press and HOLD start to continue the cycle, or press off/pause to clear display.

If no-go.. the timer is failed due to a power spike and must be replaced.



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

pf,,power failer...just unplug for 30 seconds,,,

PF means Power Failure!
Unplug both units for 10 minutes, then plug them back in and try operating them. You may need an electrician to investigate why you are losing power to both units

F22 Error means
DOOR LOCK ERROR
after 6 failed attemts to lock the door.
Possible Causes/ Procedure 1.-*Door lock mechanism is broken or removed from door. 2.-Door  switch/ lock unit failure. Check door switch/ tock unit. 3.- Check the wire harness connection to the door switch / lock unit and Central Control Unit (CCU).
was this helpful?

PF simply means power failure, not really a fault as much as a visual indicator to let you know that you've experienced one. i would check your electrical outlet,sounds like a loose connection

cant seem to find a fault code f 26, if you remove the top panel on your machine there should be a tech sheet explaining most f codes on the right side in an envelope, if not remove bottom panel (its in there somewhere)