Remove the door on the side of the tv with a phillips screw driver. inside you will see a box with 2 screws . loosen the screws and pull out on the box using the handel in the center. When replacing the lamp and cage make sure not put your fingers on the lamp and wipe in off before you reinstall it. snug (not tighten ) the screws on the cage and replace the door. Make sure the door in closed properly. ther is a switch, and if the door is not closed all the way the set will not come on. Last make sure to clean all dust from fan vent and door area.
169 views
Usually answered in minutes!
×