Model # PYET244AYW, Serial # 15438727GL Problem started with auto dry cycle not advancing - dryer would run forever in that cycle unless shut off manually and the clothes were so hot I couldn't take touch them right away (I don't know if it was because the dryer was running non-stop for 8 hours). Dryer ran this way for about a week - I dried in timed mode but my teenage son would forget and put it on auto dry sometimes. Then I went to start the dryer and nothing. It will no longer turn on. How can I tell if it is the timer or thermostat/thermal fuse?
Check the blower wheel, sounds to me like it is loose on the blower motor, common on these dryers. One sure sign would be a warped filter and a rusted top. The blower aint putting out enough and the dryer is over heating .
If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61
Replace the thermal fuse and the high limit switch.
They come as a set.
Clean the auto dry sensor with rubbing alcohol.
Hi,
There
can be many reasons why your dryer will not start or turn...
The
most common causes are the belt breaking or jumping off, or the motor
going bad...
Here are a couple of tips that I wrote will help
you to figure out why your dryer will not run...
Dryer Repair
- The Dryer
is not Turning
Dryer
Repair - The dryer
will not start
heatman101
1,119 views
Usually answered in minutes!
×