Canon i255 printer--print head error

How to remove and clean a Canon printhead - YouTube

? 1:46
www.youtube.com/watch?v=ZheZf-vdho8
Mar 24, 2013 - Uploaded by Mike Stone A Video on how to remove and clean a print head from a Canonprinter. ... an error saying, incorrect printhead installed or something like that.

Canon Printer Error B200 means a faulty print head. A print head is a part that divides the ink from the cartridges on the paper, indicating it's one of the several important features of the entire printer. Print heads are known to be problematic, particularly on cheaper printers.

6 steps to Fix Canon Printer Error B200:-

1. Reset the printer.
2. Remove any obstructions.
3. Clean the printer head.
4. Manually clean the print head.
5. Remove old ink.
6. Re-install the printer drivers.

For Expert Advice check here- Canon Printer Error B200

You must install driver software for your printer.Here is the adress to download your driver http://www.nodevice.com/driver/i255/get32889.html

Please get new driver here: www.driversdown.com/
www.nodevice.com/driver/company/Canon/Printer.html
www.usa.canon.com/cusa/office/products/.../hs_1200ts
jay gkt

5100 is a carriage error. check the timing strip for contamination (plastic strip about 1/4" in width). Check for obstructions.
more information on this error can be found at http://www.fixyourownprinter.com/forums/laser/25975

5100 is a carriage error, check the timing strip for contamination(plastic strip about 1/4" in width) 
The unit is not homing, check for obstructions.

Got the error U052.....with incorrect print head. Has been printing just before. How do I remove the printhead and place it back in. My printer is Canon MP610

Hi, check the nozzle and test , if the result not in solid color there are spaces within the color means need head cleaning after head cleaning twice test print .

I Had The Same exact thing on my MP210, Check if there is a peice of paper in it or just somethign that would restrict the Ink Cartrige Tray from opening, I had a peice of paper stuck in it and I had to gently pull it out :) And I was printing in no time :P