How to connect a Panasonic TH42PA20 to Apple TV

For my iPad2 I bought this adapter:

Try the HDMI straight from Apple TV to your receiver, or at least the TOS Link (Optical Cable)

We regret to inform you the USB connection from an Apple TV will not provide you any sound. We recommend you connect the Apple TV with an Optical cable then place the home theater on the Optical input to hear sound.

There are no inputs into the Panasonic BT-330 for video, only Digital Audio. You should be able to connect the Apple TV directly to your TV, however.

if notebook got vga out and tv got vga is verry simply, conect them and after select tv as your secondary display
cole primary display to the seconday
start tv and go to the imput menu, select pc

and will be ok

just 1 problem the clarity of vga canot be compared whit hdmi conection

best regards

The BT205 only has a HDMI Out so you need to connect both your BT205 and Apple TV to your TV either directly or through your splitter (depending how many HDMI Inputs your TV has).

You then need to connect either the Digital or Analogue Audio Port from your Apple TV to your BT205 and select the Audio Output from your BT205 as detailed on Page 27 of the manualat the link below.

http://tda.panasonic-europe-service.com/docs/2z4e3b157ez3z2a0dbz656ez706466z21z3703f025f4fa80ffdb9e5a7957895ca96b778f45/tsn2/data/ALL/SCBT205/OI/812908/rqt9445-b.pdf

This will give you the picture from your Apple TV to your TV via the HDMI and the Apple TV sound to your BT205 via the Audio Port.

Take a patchcord with two rca jacks.Connect one end into a stereo that you may have in your home.They will go into the aux in on your stereo.connect other end into your audio out on your tv.If the tv plays through your home stereo then you know that the audio amp in your tv is caput.

there are a number of parts that may cause your problem power supply, z or y sustain boards, drive boards or panel. needs a qualified servicer to check out.

I advise you Sir ,to Change The Screen

you may need to check you display setting on your flat screen to see if it set to 480p. You may be sending to low of a resolution from the phone to the TV