Clark tmx15s error codes 204, 205 & 255 - Clark Forklift Horn Button Switch , Cat Etc

FAULT NAME: VMN HIGH
- FAULT DESCRIPTION: wrong voltage on power motor outputs, failure in the power section or in the mosfet driver circuit or in the motor. https://www.forkliftaction.com/forum/trouble-code-31.aspx?t=14834

https://errors-codes.jimdofree.com/clark/

Error code 42 on a Clark forklift model FCG 32 indicates a problem with the fuel system. Specifically, it means that there is a problem with the fuel injection system, such as a clogged fuel filter, damaged fuel injector, or fuel pump failure. This can result in a lean or rich fuel mixture, causing the engine to run poorly or not at all. It is recommended to have a certified mechanic inspect and repair the fuel system to ensure safe operation of the forklift.

CE90 is Drum themistor abnormal
Check the drum themistor & connector...
Swap process unit, if still giving same error, probably LGC board issue

Do you hear the groan of the hydraulic system?

Hi,
I have clark forklift not starting
error: canbus error 1

yes here is the link its from Microsoft http://www.microsoft.com/downloads/en/details.aspx?familyid=048DC840-14E1-467D-8DCA-19D2A8FD7485&displaylang=en         hope this helps and please vote

it's in spanish. it means, literaly, Pay gym ÿÿÿÿ eg ÿÿÿ QA C ~ Ă Ă Ă ˛ C ÿÿÿÿ Australia Day

sounds like the #1 rectifier is shorted or the insulator gasket is shorted through -also the 1A contactor may be welded shut -usually caused by a weak battery or running a discharged battery too long. -Troy from A-Lift Services

Hi, Just go to the Clark tools site & brushes can be bought on-line & sent to you.
http://www.clarkeusa.com/support.htm
Here is the link for you. Best of luck Ian Wallace