At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Remove the battery for 20 mins. replace the battery.turn on and go to the camera's Menu scroll through the settings to the Date & Time, set the current date and time.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Resetting by 'Software'
Resetting to the Factory Default Settings from the interface:
Go to the interface of your camera by typing in the camera's IP address in the browser. Example: http://192.168.1.253/
Click Setup, Maintenance, Default Reset, Reset to default and then click Execute.
Resetting by 'Hardware' Resetting to the Factory Default Settings using the Control button:
Disconnect the 'DC IN' cable from the camera.
Hold down the 'Initial Set' button.
Reconnect the power adapter using the 'DC IN' jack while holding down the 'Initial Set' button. Release the 'Initial Set' button after 5 seconds. (The reset could take up to 180 seconds)
When the 'Status' indicator changes to green, the process is completed and the camera had a Factory Default Reset.
Remove the batteries for 60 seconds, at the same time press power and hold for the juration of the time, this will remove residual voltage and reset the processor ic, "long shot" if no change the zoom part of the lens is malfunctioning, the zoom motor or gears are jammed.
1. Check the "exposure compensation"...you may have accidentally moved it to a higher number. It's the top button in the 4-way controller.
2. If that checks out ok, go into the menu and find "reset" to return to factory default settings.
Enter the SETUP menu and select RESET. You'll be prompted to reset two sections. Answer YES to both and everything that can be set to default will go back to the factory default state.
×