Hi, My dishwasher seems to start ok i.e. resets, drains water and then sounds like water is being pumped in. It then stops on no 2 - the scrubbing bush and does nothing. When I open the dishwasher there is no water inside. I've checked the water inlet pipes - all seems fine. Can anyone help? Donna
Hi I have a indesit di620 dishwasher it's flashing number 2 light and won't finish any cycle it just drains the water In to the waste continuously any have this problem??
You need to check the inlet walve . when you start the unit you say it drains. so after the drain do you hear the water entering the dishwasher? If you hear a sound like a buzzing noise that would be the inlet valve working. if thats the case there is a clog at the screen in the valve not allowing the water or enough water in the tub. seeing that this is a portable unit you will also want to check to make sure the fill hose is not kinked up anywhere in the cabinet or under neath the dishwasher. If you hear no buzzing noise you need to check the inlet valve with a meter to first make sure your getting power to it and that the valve itself if good. check these things out and let me know what you found and we can go from there
Hi,
Here is a tip that I wrote that will help you with your dishwasher not draining problem...
Dishwasher Problems - Water will not drain out
heatman101
Hi,
Here
is a tip that I wrote that will help you with your dishwasher not
draining problem...
Dishwasher Problems - Water
will not drain
out
heatman101
1,055 views
Usually answered in minutes!
Please explain how to check the valve?
Hi,
We have the same problem and we've had everything checked. All the valves and wiring seem fine, but still it gets stuck. Would it be anything to do with the pcb? Does anyone know how much they cost and where they can be bought from?
Iona
fitted new bush wqp12-9348 dishwasher and it won't work , checked water and electrical supply and both ok
×