WEKA Hammer Drill DK13 - Diamond Products 01738 Core Bore Weka DK12 Drill Motor

Hammer drills usually are nonfunctional.
Turn your hammerdrill function off and you should have a smooth drill function. You're good to go.

Before the invention of the hammer drill, people face a lot of trouble drilling in the tight spaces. They had to break down the parts in smaller units in order to drill it properly. But, now the time has changed and the users can easily drill on a portable manner. But, one might wonder, what makes the best hammer drill
? The answer is being more and more complicated each year with so many brands on the market.

The market offering is huge and most of the brands are continuously reinventing their products. We have analyzed many different drills from cordless hammer drill to a corded hammer drill, to hammer drill machine to cordless hammer drill drivers. Thus, we have come up with these top picks.

This one should have a knob or lever on the side of it to switch between "drill" and "hammer plus drill" It can be used as either a regular drill or a hammer drill.

Hi my 925 has had same problem right out the box it must be an allignment thing a find a tap with the old hammer sorts it out

Make sure you have it in the hammer drill mode. To check that it will hammer you can remove the chuck and just run the drill with the front pressed against a wood surface. It should vibrate pretty hard. If this works then you may have the wrong bits or chuck on the drill.

Make sure the bits that you put in there are SDS+ bits. You don't have an adapter in the drill do you?

there should be a slider type switch on top of the drill. and there will be a picture of a hammer, and a picture of a drill. slide accross to the drill picture for drill, and hammer for the hammer drill

The spade bit sold with the hammer drill was actually too large for the hammer drill. We found that the spade bit had over heated (not from overuse or heavy use as only two ladies were using the hammer drill) but because the bit was too large it put too much weight on the drill. The bit had to be removed from the chuck using a hammer and force causing a bearing to come out and the chuck now needs repair. Solution repair the chuck on the hammer drill and buy a lighter spade bit. Then continue jackhammering the cement out of the shower cubicle.

There are cordless varieties of just about any type of hand drill, even the specialized hammer drill. These hammer drills work in the same manner as any of the core hammer drills or regular drills. Powered by a set of rechargeable batteries.