Factory settings code - Nokia E5 Cell Phone

I did a search and found this answer for you

Here is the location with full instructions:
The module is fastened to the top of the firewall directly behind the fuse box. It can be reached easily when you lie on your back in the driver floor area with your head close to the brake pedal. Just look up and you'll see it is clearly marked and the sticker also displays the factory-set access code for your truck.
Once you locate the module Make a note of the 5-digit access code on it.
Once you find the code, here is how to program it:

Now that you have the codes follow these steps to operate it completely. Remember from the driver's door, all operations must start with the 5 digit code first then follow it with the other options.
When pressing the controls on the keyless entry keypad, press the middle of the buttons to ensure a good activation.

IMPORTANT: Every step outlined in every procedure below must be done within five (5) seconds of the previous step.

REMEMBER THIS: If you try the factory code first and it doesn't work try to reset the keypad back to the factory code. Your personal code does not replace the factory-set code. So no matter what you can erase anyone's code back to the factory OEM setting. You can use either code to unlock your vehicle. Each time you set a new personal code the module will erase the previous one in favor of the new code.

Deprogramming (erasing) your own or pre-set personal code and leaving only the factory-set
1. Enter the factory-set code. (5 digit) from the sticker on the RAP module.
2. Press the 1/2 control.
3. Press the 7/8 and 9/0 controls at the same time.
The system will now only respond to the factory-set code.

Unlocking the driver's door (also disarms the perimeter alarm system)
1. Enter either the factory-set code or your new personal code. The interior lights will illuminate as soon as the first valid digit is pressed.

Unlocking all doors
1. Unlock the driver's door (5 digit code) then press the 3/4 control.

Locking the doors (also arms the perimeter alarm system)
1. Press 7/8 and 9/0 controls at the same time. The 5-digit code does not have to be entered.

Deactivating/Activating Auto lock
1. Enter the five (5) digit code.
2. Press and release the 3/4 control while holding the 7/8 control, then release 7/8.

Programming your own personal entry code
1. Enter the factory-set code (keypad will illuminate when first digit is pressed).
2. Press the 1/2 control.
3. Enter your personal 5-digit code.

i need a factory setting code for my Tecno life

To restore Go to Menu>Settings>Restore Factory Settings>Enter security cod(Default will be 12345)
Thank You
Don't Forget To Rate

factory setting code is 12345. Resetting a device to factory settings means it will then be in the same condition as when it left the factory.

Hi,

To restore to factory settings you no need any codes.

Please follow the below steps to restore your mobile to factory settings

Menu > Settings > Restore factory settings

When you select this,It will ask for security code.The default security code for nokia mobile is 12345.If you have changed the security code then type that code.

It takes several seconds to bring it to factory settings.

Thank You

Hi,

To restore to factory settings you no need any codes.

Please follow the below steps to restore your mobile to factory settings

Menu > Settings > Restore factory settings

When you select this,It will ask for security code.The default security code for nokia mobile is 12345.If you have changed the security code then type that code.

It takes several seconds to bring it to factory settings.

Thank You

the default code is 12345. if you have entered a security code in your phone, use it to restore to factory settings

Please do this.Type *#7370# in your mobile phone,it will ask whether you want to restore factory settings give yes and it will ask for the code the default code is 12345.Give the code and wait for some time your phone will restart and you will see that your factory settings are restored.kindly rate me if i had helped.

Programming a personal entry code and keypad association to
memory seats and mirrors (if equipped)
To create your own personal entry code:
1. Enter the factory set code.
2. Within five seconds press the 1 • 2 on the keypad.
3. Enter your personal 5-digit code. Each number must be entered
within five seconds of each other.
4. To associate the entry code with a memory setting, enter a sixth digit
to indicate which driver should be set in a memory recalled by the
personal entry code:
• Pressing 1 • 2 recalls Driver 1 settings.
• Pressing 3 • 4 recalls Driver 2 settings.
• Pressing other keypad buttons or not pressing a keypad button as a
sixth digit does not set a driver and will not recall a memory setting.
Note: The factory-set code cannot be associated with a memory
setting.
5. The doors will lock then unlock to confirm that your personal keycode
has been programmed to the module.
Tips:
• Do not set a code that uses five of the same number.
• Do not use five numbers in sequential order.
• The factory set code will work even if you have set your own personal
code.
Erasing personal code
1. Enter the factory set 5–digit code.
2. Within five seconds, press the 1 • 2 on the keypad and release.
3. Press and hold the 1 • 2 for two seconds. This must be done within
five seconds of completing Step 2.
All personal codes are now erased and only the factory set 5–digit code
will work