Kodak easyshare error lo3

Hello, Camera has detected a system error and will need to be serviced.

Best Regards, Russell

Diagnostic errors are not for the consumer but for the service tech, needs to go to repair shop.

That will be a mechanical problem and the camera is in a need of a repair.

If your camera is Out of Warranty the repair of this model for this fault is about 88 pounds + shipping. KODAK also offers a Trade up option where you will have the opportunity to trade up to a newer model 25-30% cheaper than the market price.

In order to arrange your repair/Trade up: Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

L03 means that the firmware does not have the correct checksum. Firmware has to be reinstalled. I can help you do this, but as firmware files and the way they are updated are considered confidential, I can't help you here in public. You can contact me at [email protected] (skype too by this e-mail).

Tom

L03 means that the firmware does not have the correct checksum. Firmware has to be reinstalled. I can help you do this, but as firmware files and the way they are updated are considered confidential, I can't help you here in public. You can contact me at [email protected] (skype too by this e-mail).

Tom

L03 means that the firmware does not have the correct checksum. Firmware has to be reinstalled. I can help you do this, but as firmware files and the way they are updated are considered confidential, I can't help you here in public. You can contact me at [email protected] (skype too by this e-mail).

Tom

your camera will require service.
to setup a repair, please go to www.kodak.com/go/itg

your camera will require service.
to setup a repair, please go to www.kodak.com/go/itg

I have the same problem in my Kodak Z8612 and I took it to the service center. They told me its a Lense error and the lense has to be replaced.

error l03