It will lock up and not turn on

The flashing standby light on your Luxor TV can indicate several things, including:

1. Power supply issues: If the TV is not receiving proper power, the standby light will flash.
2. Malfunctioning hardware: A malfunctioning component in the TV such as the power supply, main board, or backlight system can cause the standby light to flash.
3. Overheating: If the TV is overheating, it will go into protection mode and the standby light will flash.
4. Software issues: A software glitch can also cause the TV to display a flashing standby light.

If the flashing standby light persists, it's best to unplug the TV, wait a few minutes, and then plug it back in. If the problem persists, you may need to contact the manufacturer or a professional repair service for further assistance.

Sounds like you have a faulty power circuit one of the most common faults with most TV's with a standby mode you would probably need to get an engineer to replace the circuit board us if you try to change it yourself some of them are affected by static discharge or the salts in body sweat so you should use latex gloves to avoid corruption of the circuit board on installation I hope this helps

My baird JO47 tv is stuck on standby - Digital TV - Streaming ...

www.tomsguide.com/forum/55998-4-baird-jo47-stuck-standby

Dec 17, 2012 - 4 posts - ‎2 authors
My Baird JO47 tv is stuck on standby and won't come off. ... I have a panasonic 50" TV it will not turn on no green light or standby red light ... Forum; my tv standby light keeps flashing blue on and off and won't switch on Forum ...

Baird JO47 Stuck on Standby ' Electronics Forum (Circuits ...

when in stand-by mode then red light's blinking. Try to turn it on not from remote but by pushing a button on the set.

Well, at least the standby 5vdc for the processor is working but may not be for the rest.
Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://s807.photobucket.com/home/budm/allalbums
http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com

locked on standby and i have a remote and no power just orange standby light ?

standby light flashes tv wont turn on

My screen turns black and the TV goes into standby mode (I get an Amber Light) within 3 seconds after turning the TV on.

wait a minute you wanted me to pay you to tell me how to fix it... now you want me to tell you how i did it ...no thanks ...well for 9.99 a month ill tell you...no thanks

i was programming my television by hand because i do not have a remote to my television and i accidentally set the child lock and now my tv will not turn on what can i do to fix my tvtv is on standby, standby light is on. can turn tv on with programable remote after pressing on button several times to set code on remote. press any function button and screen says child lock is on. can't get anywhere pressing any buttons, turn tv off with on/off button and tv goes back to stand by. don't have magnavox remote any ideas?