Yamaha Receivers have International Warranty?

SOURCE: yamaha rx-1500 av receiver

some times the speaker cables are touching, double check, I had this with my amp and it kept turning itself off

SOURCE: Yamaha rx-v456 av receiver, shut down with optica cable

Does it work without PS3 attached?
When receiver turns off, it is usually due to badly connected/configured speakers. Try powering on the receiver without speakers.

SOURCE: Yamaha RX-550 receiver. Presently, no sound on

This solution helps! I got this unit from a friend and there was no sound from the left channel, and after playing with the input knob, there was sound.
I sprayed alot of electronic cleaner and it worked like magic.
the unit is now in full working mode.

SOURCE: Yamaha receiver mdl RX-V367. What

Here are the codes for your Yamaha RX-V367: 733, 663, 732,747, 730, 731, 745, 848, 847, 657, 786, 684, 849, 655, 823, 841, 646, 650, and651.

Step 1:
Press and hold the AUX button until all mode button back lights come on, thenrelease.

Step 2:
Press 2, and then enter the device code corresponding to the equipment (listedabove).

Step 3:
Press the POUND (#) button. If the code entered is valid for the remote, themode light flashes three times. Try using the DISH remote to control the component,if it doesn't work with one code try another.

Although we try and facilitate a one remote solution, wecannot guarantee that our codes with work for all brands and models components.Thank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Support Representative

SOURCE: Need yamaha codes to program into uverse tv ir remote

I have the Yamaha V371 receiver and Uverse code 5167 worked on the BLACK (not grey) Uverse remote