Equator EZ 3600 CEE Front Load Washer / Dryer Logo
Posted on Aug 19, 2007
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Hoover Aristocrat Front Load Washing Machine

At end of wash cycle pumps water out, but does not spin. Pump keeps working as normal waiting for high speed drying spin Checked for loose wires around motor belt is OK Motor working normaly thruogh all wash operations except for final spin

  • 1 more comment 
  • Anonymous Mar 16, 2014

    automatic topload digital washing machine not rotating speedly as before, very slowly rotating, allother positions rotating fast ,i mean for spinning and drying ok

  • Anonymous Mar 26, 2014

    washing speed is slow and spinning not working. time is going on motor running sound coming.18 moth old machine. belt loose? or

  • Anonymous Mar 31, 2014

    The door to my Hoover Electra 530 Dual Spin, Model A3656,front loader is jammed shut after the wash load has completed. It did this occasionally and always came loose after a thump on the door with my hand. This time it wouldn't budge. Can't find a manual release device.

×

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Hot-Shot:

An expert who has answered 20 questions.

  • Expert 38 Answers
  • Posted on Aug 19, 2007
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Hot-Shot:

An expert who has answered 20 questions.

Joined: Jun 25, 2007
Answers
38
Questions
2
Helped
36264
Points
114

I think you will find the carbon brushes r worn out they r mounted on the side of the motor held on by 2 5.5mm nuts or 2 screws 1 brush on each side of the motor switch off at the mains b4 you start work good luck

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Clothes still wet at end of cycle

Hi,

Problems with a washing machine not spinning or not draining are often inter related..

If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing machine not draining and or not spinning


heatman101

3helpful
2answers

My hoover washing machine wont spin and is full of water. model number is hnl 9146-z

It's a safety feature that doesn't allow the machine to spin when there's still water in the tub. The drain pump has probably failed and you would need to replace it (there are some good places online where you can buy appliances spare parts). Try to set your machine on a 'Drain' cycle and see if the pump works.
2helpful
1answer

Machine not draining

Can you hear the pump running just before the spin cycle, if so then I suspect a blockage in the filter or pump hose, If not and machine is quiet then it could be a faulty water pump or PCB board and you would have to call a technician.
0helpful
1answer

Ca230 w. machine not spinning leaving clothe wet, no water in drm

It is possible that the belt at the back of the machine is slipping. try running the spin cycle without any load in the machine. I assume this is a front loading machine and you are in UK. the Belt is available on line for about 15 pounds.

If it is running the washing cycles normally, it can't be the motor.
Dec 06, 2017 • GE S8000E
1helpful
1answer

Our hoover ultra care 1300 large load washing machine spin fault

The most common cause of machines stopping mid cycle is not draining. Your machine should have a filter behind the kick plate at the bottom.
If this is not the case please post back for further assistance.
1helpful
1answer

HOOVER LOGIC 1300

you need to access your drain pump and check it for an obstruction but when you pull the hose off keep in mind it might have a lot of water in it i usually use a shop vac and pull all the water out through the drain hose before removing the hose or opening the pump sorry i cant be more specific but ive never cleaned the pump on a hoover
0helpful
2answers

GE Front Loading Washing Machine seems to be holding water....

The high speed spin of a front load washer should normally do a good job of getting squeezing out the water but if there is an oversudsing condition that makes it hard for the drain pump to operate then the suds and water will just stay there. First make sure there is no actual clog in the drain line then run a load with no soap or detergent and see what happens. It's always better to use a low suds detergent with this type of machine
0helpful
2answers

Washing Machine Hoover H100M fills too much water in the drum.

this is 1 of 2 solutions  2 this problem the first thing to check is the vacuum system or it is a split in the pressure switch hose 
Not finding what you are looking for?

818 views

Ask a Question

Usually answered in minutes!

Top Equator Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you an Equator Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...