Diswasher will not fill clock stays at 130 an

Not sure but I think it is normal, not even sure it is a countdown timer - illustration shows just a single large knob which presumably is the main programme selector, which is basically an electric clock that keeps pausing whenever the washer is busy filling, heating, etc. and moving on when it is time for the next function.

Modern cold fill, water economy washers tend to take much longer to complete a cycle with the shortest programmes taking more than an hour...

control card

Bad motor/ DC power inverter control assembly. My suggestion is don't buy electronically controlled washing machines. They're designed to stop working and for corporate to sell you parts and service again and again and again, until you go buy a rebuilt second hand fully electro-mechanical good ole reliable mechanical top load washing machine.

Sounds like motor not running is this due to belt off/ or motor brushes worn or actual motor burned out ? Try the abc to find out. good luck.

pressure chamber blocked with soap depists scale etc will need removing for service and cleaning partial strip down required.

Not a programme error but carbon brushes on motor.Fixed by local engineer.

Unplug the washer for ten minutes, see if this clears the problem.

yes a quick wash is for coloured clothes that have been worn once or twice and dont have bad stains on them.This quick wash will take between 30 and 50 mins to do a wash and is the best programme for the clothing that I have discribed ie: worn 1or2 times and no stains will save you on electric and water peter

try holding in the start button for 10 sec to see if it resets,or the board could be faulty part no 8801201

Most likely you have a control panel failure.