Read error I have a Fuji F470 digital camera, after I maked a picture I can't see the photo back. "read error". How can I fix this problem please?

Get a card reader and use it to download the pics to a computer. Then, format the card in the camera to get it to work properly again.

Your cameras shutter is sticking. lines on photo's or over exposed photo's are due to the shutter not closing completely over the lens.
Video is fine because it does not use the shutter.

The shutter will require cleaning.

I had this problem! just solved it by erasing all the photos off the card (or reformat it) hopes this helps!

Read the post about F470/F460 keypad failure on my tips page of my profile under "The only way I know how". This is a common problem for this model.

After surfing for solutions, I tried uninstalling all the Fuji software and using Windows to pull the pictures off the camera...It worked! Card and USB were working just fine even though they came back with errors using the Fuji software.

Hello, if the batteries where not fully charged when you where copying pictures to PC, the camera may have corrupted the pictures on the xD card. That is why the camera is showig a grey picture and turning off, it can't work without a valid picture card. A vey good way to restore the pictures on the card is to buy a card reader (they are unexpensive) that can handle xD cards and use a picture restore software.

For the restoration proccess, read the following page:

http://techblissonline.com/photo-recovery-deleted-pictures-corrupted-images/

Maybe you don't need to buy a card reader if your camera is recognized as a disk drive by the computer but I strongly recommend a card reader for future picture downloading to PC.

After recovering your pictures, you have to format your card in order to use it again in camera.

Good luck!

It isn't a good idea to do it. Your camera may have problems reading the pictures due to file incompatibility issues, but your frame will be able to read them.

The best way to fix this is to get a card reader and a seperate memory card for your frame (if thats what it uses).

The D-560 will not accept any card bigger than 512 mb. No firmware update is available.

Use an Image Editor the has Red Eye reduction mode
A Free one is Googles Picassa.
Read uop the camera manual on how to achieve this also
A comprehensive manual is usually to be found on the CD in PDF format

The camera does not do exactly what you want. You can print the date & time using the Digital Print Order Format as described on page 52 of the manual (link below): http://www.fujifilmusa.com/JSP/fuji/epartners/bin/FinePix_F470_Manual.pdf I don't see any way of having the data & time appear on the images stored on the PC or camera. Please update the question & let us know if the information given was useful to you - Good Luck!