Question about Life Fitness 9500HR Next Generation Remanufactured Treadmill

2 Answers

It starts how ever after 2 minutes it stops and go back to the main menu

Posted by on

  • Leo Silva
    Leo Silva Jun 30, 2019

    Como resolveu ?

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My life fitness will not was on autowax, im running separate wiring to wax on manual

Posted on Aug 07, 2009

Ad

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 463 Answers

Check for a little memory backup battery, probably a CR2032 located somewhere under the control panel.

Posted on Mar 26, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The setup menu keeps flashing on the screen and I cant' get it to stop also the remote control is not working


Reset your TV. Unplug it from AC mains, and pulg it back after 5 minutes of so. This must make it a hard reset. If this do not help you, contact the service center.

Jun 14, 2012 | Sylvania LC420SS8 LCD TV

1 Answer

How do I fix the clock


Push the main control knob (right side of the unit) either up or down, until the Kenwood's display screen shows "Clk Adj." Press the center of the control knob for about a second to enter the clock-setting mode.

  • 2 Push the main control knob either up or down to set the Kenwood's hour display. Stop when the correct hour shows on the screen.
  • 3 Push the main control knob to either the right or left to adjust the minute display. Stop when the correct hour shows on the screen.
  • 4 Press the "Menu" button located in the bottom-left corner to save the changes you made to the clock. This returns you to the main menu
  • Oct 19, 2011 | Kenwood Car Audio & Video

    2 Answers

    One month ago I bought a rival 0.9 cu ft digital oven,model rgst902 ,I only use it mainly to warm things up, I was in the process of cooking something for five minutes,when I went to get the food out the...


    I have the same model, after 2 days of normal operation it has stopped working. No lights on the dislay at all and the keypad is unresponsive. If you open the door the light comes on and the turntable slowly rotates. Im taking it back.

    May 11, 2011 | Rival Microwave Ovens

    1 Answer

    How to reset to factory default a Cisco Aironet 340 (AIR-BRI342)


    1. Use a straight-through cable with 9-pin male to 9-pin female connectors to connect the COM 1 or COM 2 port on your computer to the RS232 port on the bridge or AP. You can select the Reset option only through the console port.
    2. Open a terminal-emulation program on your computer.
      Note: These instructions describe HyperTeminal; other programs are similar.
    3. In the Connection Description window, enter a name and select an icon for the connection and click OK.
    4. In the Connect To window, select the port to which the cable is connected and click OK.
    1. In the Port Settings window, enter the following settings:
    2. 9600 baud
    • 8 data bits
    • No parity
    • 1 stop bit, and
    • Xon/Xoff flow control
    1. Click OK and press Enter.
    2. When the Main Menu screen appears, reboot the bridge or AP by turning the unit off and then turning it back on.
    3. When the bridge or AP reboots and the Main Menu screen reappears, typ
    4. Use a straight-through cable with 9-pin male to 9-pin female connectors to connect the COM 1 or COM 2 port on your computer to the RS232 port on the bridge or AP. You can select the Reset option only through the console port.
    5. Open a terminal-emulation program on your computer.
      Note: These instructions describe HyperTeminal; other programs are similar.
    6. In the Connection Description window, enter a name and select an icon for the connection and click OK.
    7. In the Connect To window, select the port to which the cable is connected and click OK.
    8. In the Port Settings window, enter the following settings:
      • 9600 baud
      • 8 data bits
      • No parity
      • 1 stop bit, and
      • Xon/Xoff flow control
    9. Click OK and press Enter.
    10. When the Main Menu screen appears, reboot the bridge or AP by turning the unit off and then turning it back on.
    11. When the bridge or AP reboots and the Main Menu screen reappears, type 2 to select Reset and press Enter.
    12. Type yes and press Enter to confirm the command.
      Note: The Reset command is valid for only two minutes immediately after the bridge or AP reboots. If you do not enter and confirm the Reset command during that two minutes, reboot the bridge or AP again.
    13. After the bridge or AP reboots, reconfigure it by using the terminal emulator or an Internet browser.e 2 to select Reset and press Enter.
    14. Type yes and press Enter to confirm the command.
      Note: The Reset command is valid for only two minutes immediately after the bridge or AP reboots. If you do not enter and confirm the Reset command during that two minutes, reboot the bridge or AP again.
    15. After the bridge or AP reboots, reconfigure it by using the terminal emulator or an Internet browser.

    Apr 17, 2009 | Aironet BR500

    1 Answer

    Using the stop watch feature


    Dennis,
    "Chronograph" is watch terminology for 'stop-watch'.
    There are 3 small dials on the watch.  The main dial has a minute hand and an hour hand.  The big second hand on the main dial is not for the main time of the watch.  It is for measuring seconds for the stopwatch.
    The 2 small dials at 10 o'clock and 2 o'clock will give you minutes and 1/10 of a seconds.  
    There are 2 buttons on the side of the watch. Top Button:  Start/Stop Bottom Button: Reset
    To set the chronograph to its default position, you would pull out the stem to the first position and push the buttons.  Also, pull the stem out further to the 2nd position and push the buttons.

    Jan 13, 2009 | Swatch Chronograph Wach SVCK4035G Watch...

    1 Answer

    When I turn on the Wii console freezes in the main menu screen.


    Try the Wii "RESET".
    Here's how:
    1. Unplug the Wii for at least 5 minutes.
    2. Plug it back in.

    Dec 27, 2008 | Nintendo Wii Console

    1 Answer

    Sandisk sansa clip mp3 shuts of and wont turn back on...


    You can set the timer under Auto Power Off and Sleep settings to turn off the Sansa
    ®
    player automatically when it is playing for a certain time.
    1. Press Menu button to return to the Main Menu.
    2. Move to Power and select it.
    3. Select Auto Power Off or Sleep.

    -Tha Mp3 Doctor

    Nov 06, 2008 | SanDisk Sansa Clip MP3 Player

    1 Answer

    Main menu


    If you have one of those cartridges with the many games on one then you have to turn it off and start again it is annoying but it stops the game from freezing. I have never heard of the b button going back to the main menu so you'll just have to turn it off every time sorry.

    Jun 13, 2008 | Nintendo DS Lite Console

    4 Answers

    Unlocked european phone MMS


    wrong! ive got an unlocked european phone and i got these settings that cingular WOULD NOT give me off the net


    -= MMS Web Session =-
    Menu -> Web Access -> Web Sessions -> Menu -> New

    Name: CINGULAR MMS
    Homepage: http://device.home
    Service type 1: WAP
    Gateway IP 1: 066.209.011.061
    Port 1: 9201
    Domain 1: (blank)
    Service Type 2: WAP
    Gateway Type 2: 000.000.000.000
    Port 2: 0
    Domain 2: (blank)
    DNS 1: 000.000.000.000
    DNS 2: 000.000.000.000
    Timeout: 10 minutes
    CSD No. 1: (blank)
    User Name: (blank)
    password 1: (blank)
    Speed (Bps) 1: 9600
    Line Type 1: ISDN
    CSD No. 2: (blank)
    User Name 2: (blank)
    Password 2: (blank)
    Speed (Bps) 2: 9600
    Line Type 2: ISDN
    GPRS APN: wap.cingular
    User Name: WAP@CINGULARGPRS.COM
    Password: CINGULAR1

    -= Message Setup =-
    Main Menu -> messages -> Menu -> Message Setup

    MMS Message Setup (This is very critical)
    Inbox View: Sender
    Srvce Center No: +13123149810
    Auto Cleanup: 5 days
    Email Gateway: 36245
    SMS Alert: On
    Use GPRS: Yes

    -= MMS Message Setup =-
    Main Menu -> Messages -> Menu -> Message Setup ->
    MMS Message Setup -> Server Info -> Menu -> New ->

    Service Name: CINGULAR MMS
    Server Name: http://mmsc.cingular.com
    Web Session Name: (Choose the Web Session you created for MMS)

    set to default

    Mar 10, 2008 | Motorola Mobility RAZR V3

    1 Answer

    Main Menu


    power supply regulator and horizontal output transistor.

    Jan 17, 2008 | JVC AV-27230 27" TV

    Not finding what you are looking for?
    Life Fitness 9500HR Next Generation Remanufactured Treadmill Logo

    Related Topics:

    382 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Life Fitness Exercise & Fitness Experts

    Vincent G
    Vincent G

    Level 3 Expert

    2361 Answers

    Android Man
    Android Man

    Level 2 Expert

    278 Answers

    Kenneth Simmons

    Level 3 Expert

    1027 Answers

    Are you a Life Fitness Exercise and Fitnes Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...