Wireless light off - Zhone 1518-A1-NA Wireless Broadband Router - 54 Mbps 1 x ADSL Network WAN, 4 x 10/100Base-TX Network...

Not knowing the model of your unit, I respond with a general answer:

Using the wireless controls

You can control the wireless devices in your computer using these features:

?? Wireless button

?? Wireless Assistant software (select models only)

?? HP Connection Manager software (select models only)

?? Operating system controls

Using the wireless button

The computer has a wireless button, one or more wireless devices, and two wireless lights. All of the

wireless devices on your computer are enabled at the factory, so the wireless light is on (blue) when

you turn on the computer.

The wireless light indicates the overall power state of your wireless devices, not the status of individual

devices. If the wireless light is blue, at least one wireless device is on. If the wireless light is amber, all

wireless devices are off.

Because the wireless devices are enabled at the factory, you can use the wireless button to turn on or

turn off the wireless devices simultaneously. Individual wireless devices can be controlled through
Wireless Assistant software (select models only) or through Computer Setup.

check chap.2, page 22 in this manual:
http://tinyurl.com/3czcyss

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response
Thanks,
Joe Diaz, Nashville TN.
De Cayey, P.R.!!






I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

wireless light will litup only if a wireless connection is established with any devices....

make sure the wireless switch on your laptop is turned on and try...

I would advice you to perform a factory reset on your unit if you think the wireless light is completely and your wireless computers are not connecting wirelessly. Factory reset will delete all your settings and you need to set up the internet back.

You can also try power cycling the unit. Turn if off for 2mins and then power it on , then observe the wireless light.

There is also a possibly that the wireless light is just dim. You can check your wireless computer if they are getting a signal from your router. If they are getting a signal, that means the wireless light is not properly light up.

Please give me an update to your concern. So i further assists you

Kj

WIRELESS LIGHT WILL LIT UP IF YOU CONNECT ANY ANY WIRELESS DEVICE TO THE ROUTER.. FOR EX: YOU CAN SEE WIRED LIGHT LITTED UP BECAUSE YOU CONNECTED A COMPUTER WITH HELP OF ETHERNET CABLE.. IN THE SAME IT WILL WORK...

wireless light will be ON only if you have connected any wireless devices to your network... security light will be ON only if you enabled password to connect to your wireless network.... if you have changed any settings in the router recently, then delete the saved list of networks in the computer.... then search for wireless networks in range and connect to your network....

No Sync with the wireless, either may need to connect a wireless device or PC first... If now something to do with the wireless...

The "Wireless" light doesn't indicate that wireless is available, it indicates that wireless is being used.
You need to narrow down your problem statement by what symptoms you are seeing. Does your PC "see" the wireless router? Does the router accept your connection password?
Then follow the troubleshooting script in the user manual at
http://downloads.linksysbycisco.com/downloads/WRT150N_ug,0.pdf

What is the exact model of wireless mouse you have? You may have a laser wireless mouse, which may not emit any visible light. The red light on other wireless mice are either a different optical mouse technology, or a red light for the purpose of being pretty. Not all wireless mice have a red light that you can see. Does the mouse work (regardless of the light)? Have you hit the connect button? Have you connected the wireless receiver to a working USB port?

Is the Wireless signal turned on within your 2Wire options?
Try turning it on.

http://www.storagedrivers.com/drivers/37/37951.htm