No , i cnanot switch the phone in my pocket pc

in settings go to wireless manager and turn wlan on.in some phone there is a quick acess key on the side for this.
please post comment

What to do for phone lock code i cant understand
i have Motorola EX115 mobile. but i dont know phone lock code.
if know anybodies pls send to [email protected]
or SMS to 08970787097

No, the sd card is not needed for wireless. In the bottom right corner you have an icon, press on it and select WLAN PROFILES, add a new one and start to work.

Are you sure you have a wire card installed? If so, then try this:

1. Right-click the My Computer icon and select Properties.
2. Click the Hardware tab and press the Device Manager button. The network card should appear under Network Adapters.
   Note: If the card has a exclamation mark over a yellow background, then this is an indication that the card is experiencing a problem. Go to Driver download step 5.
   

1. Verify that the radio is enabled.
   It is possible to disable the transmitter of the wireless card without Device Manager showing any problems.
   Note: Follow the instructions provided to enable wireless card.
   
   • Most wireless cards will put an icon in the system tray (the line of icons in the lower right corner of your screen). Right click this icon and it may have a menu option to enable/turn on the wireless radio.
   • Some systems come with a Wireless Radio switch to disable the wireless radios. The wireless radio switch is usually located on the front side of the machine. If you are having difficulties with wireless connections, make sure the Wireless Radio switch is set in the On position.
     
     
     
2. Check for association to an Access Point.
   If you double-click the previously mentioned system tray icon, the configuration utility of the wireless card will appear. This utility will be able to show the status of the wireless card, showing what channel the card is using and what signal strength is being received. It may be difficult to maintain a connection if signal strength is low due to either interference or distance. For example, interference can be caused by 2.4GHz cordless phones, other Access Points in the area, and physical structures such as load bearing walls or metal partitions.
   Note: The utility can be used to configure the wireless card settings, but if using Windows XP Zero Configuration or Access Connections, you will need to use those programs to actually configure the wireless card as they will overwrite the setting of the utility.
   

try removing the battery from the Blackberry and replacing after a couple of minutes.
this will completely reboot the software. Let me know if it doesn;t work and we can go another route.

Just upgrade the software on it to version 21 from Motorola site

http://www.phonescoop.com/phones/phone.php?p=146 This is a website that should tell you everything you need to know about the phone. You can also check out user reviews.

Go to Settings-Connections-Connections-advanced-Network Card.
You will see all available wireless networks in your area. Double click the desired wireless network and tap connect. Note whether the desired network has been connected.
Hope this help,
Harit

Please note that when you want to use pocket (IE) browser of your PPC (pocket PC) phone; you need to ensure GPRS setting has been made in your phone.

For GPRS setting (Example: Airtel India network) please do the following steps.

Start --> settings --> Connections(tab) --> Connections(icon) --> under My ISP tap on "Add a new modem connection" --> enter connection name: airtel --> select a modem: Cellular Line (GPRS) --> access point name: airtelgprs.com --> leave blank on username, password & domain --> Finish.

If you are using different network (sim card) then you need to get "access point name" information from them.

you can upgrade to some better browser like
'thunderhawk'

http://www.bitstream.com/wireless/products/smartphone/index.html

with java & compatible pocket pc 2002