Problems pairing up a Nokia 6301 with my Motorola H500

Here are the steps to connect your Motorola H500 to your Nokia 2680 phone:
1. Switch off your H500 by pressing the main button for few seconds. 2. Put the H500 in discovery mode. To do this, press and HOLD the main button till it glows a solid blue light (no blinking). 3. Open bluetooth in nokia phone. Go to Menu, settings, Connectivity, Bluetooth. 4. Select "Add a new Device" and search for H500 5. Click on the name select pair. 6. it will ask for pairing code. Enter "0000"
You are done. Revert in case you have any problem

To pair the headset, first turn off the headset if it’s not already off, hold the multi-function button until the LED light turns solid blue (not blinking blue) with an audio indication, then use your phone to discover and pair with the headset using “0000” as the default pass code.

Turn the LG Shine off, wait 10 seconds and try again. Power cycling the phone really does help sometimes. Let us know if this doesn't work.

i have a h500 cannot pair with my phone lg env

The 0000 worked for pairing my H500 with my new LG phone!!!!!!! Thanks!

I had the same problem and went through several iterations. The AT&T store gave me the idea of powering off the BlackBerry and H500 but this did not correct the problem.

What did correct the problem was powering off the BlackBerry, then pulling out the battery and waiting a minute, then reinstalling the battery and powering up. I had the H500 off as well and powered it up into pairing mode at the same time. Back in business now, so that seems to be a way to clear the error.

Good luck

Instead of selecting "Find Me", click "Add Audio", H500 will show up

hold fone 7 feet about bathtub or pool.

drop you fone fast into wata.

take push toasta oven in wata.

unplug toasta and take you fone out

YAY WARRANTY!

See the user manual page 59 for instructions on how to pair the device from the 8800. You only have to do this once.
The passcode is 0000 for the H500 which is unalterable.

It might already have been figured out but if you hold the answer button on the headset down until the light stays on steady, it is in pairing mode. You can then go to bluetooth setup on the Curve and it will find the headset.