Fujifilm camera f470 white lines problem horizontal

Sounds as if there may be a loose connection somewhere along the line.

you can go to the service center may be your display is not working properly

It's a faulty ccd. There are several comments on this website regarding this problem. If it's under warrantee you can return it but otherwise you either have to live with it until the whole thing dies (tapping it might help occasionally) or repair will cost around $100.

OK, I read that sometimes the horizontal lines in some cameras comes from the external memory contacts being dirty. If your camera doesn't have an external memory card, then it's got to be an internal board anomaly.

Under FAQ's I did not see a reference to horizontal lines.

select 'RESET' in the 'SETUP' menu it says in the troubleshooting section of the manual.

http://www2.panasonic.com/consumer-electronics/support/Cameras-Camcorders/Digital-Cameras/Lumix-Digital-Cameras/How-To-Guides/model.DMC-TZ1S.H#ts

Hi,
Your camera is having horizontal lines due to a faulty CCD, and not due to other problems.
Just tap on the side of the camera at times the horizontal lines will disappear.
If the problem is due to your dropping the camera, you might be out of luck.
If you have not dropped your camera and still facing this problem, then contact service people to replace the CCD imager in your camera .

Hope this helps .

Sticking shutter. It will require either cleaning or replacing.
lines on photo's are due to the shutter sticking.
the video function does not use the shutter so is un affected.

You have over exposed pictures due to the shutter sticking.
The video is the clue to the problem. It doesn't use the shutter.
Shutter needs to be cleaned. This is no easy task im afraid

Paging fujifilm Maker, I think you are the best person to answer for the inquiry of many user of your digicam..

image sensor failure, contact nikon for free service

I don't think [and the museum will certainly say] This has anything to do with the X-ray/storage whilst in the museums hands. It could be a processing error or a memory card error. Try formatting the card in the camera and taking a new batch of images Try another card. This will estasblish card or camera. If card - buy another card If camera -checxk on the price of a repair but I suspect it will mean when you see the price Buy another camera