Lost original remote to my 20" Duraband tv n cant get any universal remote to program to it. is there a code for it?

How To Program A Philips Universal Remote ' Codes For ...

codesforuniversalremotes.com/program-philips-universal-remote/

Here is how to Program any Philips Universal Remote Control. Turn on the device you ... Remote Control Codes December 21, 2015 at 1:19 pm. Stephanie,

Codes For Universal Remotes ' Universal Remote Control ...

codesforuniversalremotes.com/

Universal Remote Control Codes For TV & Audio. ... Codes for Philips Universal Remotes · Sanyo TV Codes for Universal Remotes · Codes for .... I have an 19 inch Emerson flat screen and a RCA universal remote. Please help with the code ..

Check these codes. 1004, 1153, 1167, 1207 These are setup codes for Duraband TV with RCA RCR311W model remote control. If you want more codes and other details to different other brands of remote control. check this.

Hello
Without its remote control, you can't select its AV channel. Just try to get a new remote control or buy a universal remote control, which have setup codes for Duraband Tv with it.
Setup codes for Duraband are:
0189 0135 0157 0153 0254 0458 0217
Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Try 1-800-remotes Factory original.To buy an exact one or very close to the original.

No way, all chinese DVD players has near the same remotes but with mixed buttons, finding a match or programming a universal remote is near impossible.

universal remote sharp tu-r160

try www.xdiv.com/remotes

here are the codes for duraband, 1004, 1153, 1167, 1207 one of these will work if not or you need more help let me know!

Check this link on OwnerIQ

http://tv.manualsonline.com/ex/thread/view/idThread/57583

You may have to register to get it

I am not sure about Direct TV but dish network does not allow the hookup to go through their box...it must go through the TV only. Speaking with Duraband at 1-800-256-2487 confirms you have to have a Duraband remote and universals won't program to it. Ask for parts dept. and order a new remote. Sorry - not good news for me either!!!