Removing rear from Columbia jogger stroller - Columbia Sportswear Fun Run Jogger Stroller

Hi Kirsty

We would recommend you contact Baby Jogger for assistance

Hi Alex

We would recommend you contact Baby Jogger for assistance.

Contact Baby Jogger

Baby Jogger's patented Quick-Fold Technology, this stroller is the only in-line stroller to fold flat in one simple step. Just pull the clearly marked "FOLD" handle and the stroller or jogger collapses into an easily loadable and storable unit. This is quite possibly the easiest fold on the market today.

It is engraved on the frame, on the right rear, above the right rear wheel. (City Elite Single )

It is engraved in the frame, on the right side of the stroller, on the lower side of the right folding handle, under the logo. (City Elite Double )

hi not sure if this will help it is for a newer model but it will give you a helping hand as most wheels remove this way

http://www.babyjogger.com/images/document/Instructions/2010_City%20Elite%20Double%20Assembly.pdf

rear wheels

you can get it here http://www.buggypitstop.co.uk

what about a wheel barrow tube could you find one of those to fit?

The manual on how to do this can be found at www.babytrend.com.

To attach the Baby Trend Infant Car Seat, recline
the seat all the way back.
• Position the Infant Car Seat, facing toward the
rear of the jogger, so that the seat shell goes
into the Child Tray and latches into place.
(Fig. 13a) Check that the Infant Car Seat
is firmly locked onto the Child Tray before
using.
• Check that the front Child Tray is firmly
attached to the jogger's armrests. Make sure
that the car seat locks into the front Child Tray.
Then turn tabs on stroller frame to lock the
front of the car seat into the stroller. (Fig. 13b)
• To remove the Infant Car Seat, squeeze the
release handle located at the foot-end of the
seat and carefully lift upward on the seat.

Hopefully that helps!

There are metal clips near the back wheels that go around the black plastic "axle" piece of the stroller. Squeeze the clip to the far side of the axle and the wheels will easily come off.