I have a HP 1320 printer that doesn't fuse properly on the first few pages. After a few pages it is okay. I have replaced the fuser unit already, it did not change. Thanks

SOURCE: Printer only prints partial page

The carousel central axel has been twisted.

SOURCE: hp 1320 prints blank LOSER SPAM ALERT 1-800-532-4187

Hello,
I would need more information on the same.
Is the printer printing blank pages, while printing configuration, internal test pages, or is it happening while printing from PC.
Please advise.

- Nikhil

SOURCE: hp laserjet p2055dn Replace fuser unit

That is a job by it self. If you don't want to damage your printer, I'd suggest you take it to an HP dealer pay some money and get it first checked and if so be the case that it has to change, let them change it.

SOURCE: printer only prints one page at a time

re- install the drivers from HP.com for the newest ones.

SOURCE: Hp Cp6015 printer has 50.7 Error code fuser has

this error could be caused by the new replacement fuser or your DC controller board. I would return the fuser that you just put in for another first. And if the issue is still there then try a new DC controller board.