Phillips plasma wont turn on power light goes green then turns on to standby red flashing light model 32fd9954 Hi there My plasma (42PF7320/79) turns itself off. The power light stays on green. If I unplug the power supply the unit will restart but turn itself off shortly after. I have vacumed the vents and the screen sit on a stand, so no ventillation issues. Thanks [email protected]

Panasonic Plasma TV Repair - Understanding 14 Blink ...

? 8:35
https://www.youtube.com/watch?v=iHBIiRxhe0w
Sep 26, 2014 - Uploaded by ShopJimmy.com
Panasonic Plasma 14 Blink Code Explained with Repair Info How to ... I guess I'll try the SC board and if that does not work simply save up for a new ... The red power led was flashing 12 timespause a few seconds then flash 12 again. ... It powers up and shows the green power light is on, but there's no ...

The power light keeps flashing and the tv wont turn on - TV ...

www.tomsguide.com/answers/id.../power-light-flashing-wont-turn.html

Oct 24, 2015 - More about : power light flashing wont turn ... December 20, 2013 10:12:55 AM ... sound like it is coming on then it shuts off and the red power light flashes slowly. ... 50in Plasma tv power light is flashing 8 times and won't turn on. ...tv to come on bcause the power button keep blinking my tv will not come on.

Sounds like one of the video cards inside the TV stop working or the plasma panel has stop working.

Hard to troubleshoot with just this info, the red light can be helpful if its 10 blinks repeating over and over replace the power supply first then the A board. Voltages check on the power supply would narrow down the culprit.
Post again if you measure the power supply voltages

I’m happy to help further over the phone at https://www.6ya.com/expert/eric_ab7c09ec01841771

hi i have a pioneer plasma tv pdpro4e all it doses is flash green red green red and on the mediar reciver as well tv dont come on help please

Sure, you will need to replace the power supply circuit board asap. this will fix your issue.

The error code of 2x red flashes tells me you need a Y DRIVE ASSY and the part number is AWZ6649. It should be replaced by a Technician thou.
Hope this hleps

need to replace caps on PSB. email for instruction and pics of what to look for. [email protected]

Unfortunately you need a repair man. The power supply is bad.

hi sounds like a power supply fault, swollen capacitors usually cause this fault,thanks

shaun

My one take too long to turn on, relay/green light on and off for hours before it can start, I use a hair dryer to heat it up everytime, aim at the center from top, then it turn on very faster, no need to service