Fs 550 start problem - Stihl String Trimmer Brushcutter Service Instruction Manual Fe 35 40 55 Ec 70

http://www.mediafire.com/view/uq3465d5wmlf83t FS55 manual

is the battery working fine.

Try Mouser.com part # P6KE16CA 36 cents a piece.

Are you sure it's not an fs-3600?
I found the manual for the fs-3600 at http://usa.kyoceramita.com/americas/jsp/Kyocera/download_center.jsp

Select legacy printers / FS-3600 model, technical resources, and finally manuals in the subcategory.

reset button are always found at the buttom if the laptop.so just check.

Try to do a reset by pressing parameters FEED and PAUSE while turning the printer, release the keys until you move the labels.
Roberto Martinez

Your printing a 3 accross label, i think your ZPL command is wrong u must define the X and Y Coordinates of each field.
This is a sample of a ZPL command that i'd wrote. Im using a 1.5 x 1 inch. label
^XA ^PRC  ^LH0,0^FS ^LL203 ^MD0 ^MNN ^LH0,0^FS
(Design No. 1) ^BY2,3.0^FO40,8^BCN,90,Y,N,N^FR^FD>:Barcode^FS ^FO64,136^AFN,45,13^CI0^FR^FDsample text^FS
(Design No.2) ^BY2,3.0^FO344,8^BCN,90,Y,N,N^FR^FD>:Barcode^FS ^FO368,136^AFN,45,13^CI0^FR^FDsample text^FS
(Design No.3) ^BY2,3.0^FO649,8^BCN,90,Y,N,N^FR^FD>:Barcode^FS ^FO673,136^AFN,45,13^CI0^FR^FDsample text^FS ^PQ1,0,0,N ^XZ ^FX End of job ^XA ^IDR:ID*.* ^XZ
I hope this will help you solve your problem...

look the unit manual HERE

FoodSaver Vac 550 Instruction Manual

FoodSaver Vac 1050 Instruction Manual

FoodSaver Professional II Instruction Manual

tires control lights oil, chassis, stands,,,

This would depend on how you drop the bike. If it just falls over you would check everything on that side that could be damaged. It would be the same for a low speed drop. However if the bike not only gets droped but hits something while sliding you might bend the frame or suspension or damage wheels or controls.,,,