Selectech dial will not turn - Bowflex Selecttech Dumbbells

https://images-na.ssl-images-amazon.com/images/I/C1C8LGqO%2BCS.pdf
https://download.nautilus.com/supportdocs/OM/Bowflex/BFX.BD552i.OMplus.EN.pdf https://www.youtube.com/watch?v=Pz8t38cosbg

A1 Locksmith Google

3 Digit Combination Lock
31-10-31

1. NOTE: If your safe DOES NOT have a key, skip Step 3.
   
2. Turn the dial to zero.
   
3. Insert your key and turn it until the plunger pops out.
   
4. Turn the dial to the left (counterclockwise) three times to the first number of the combination (pass the first number of your combination two times, stopping on it the third time).
   
5. Turn the dial to the right (clockwise) two times to the second number of the combination (pass your second number once, stopping on it the second time).
   
6. Turn the dial to the left to the last number (stop the first time on your last number).
   
7. 
   Pull the handle down; the door should open.

3 Digit Combination Locks for Security Safes
31-10-31

1. Turn the dial to zero.
   
2. Turn the dial to the left (counterclockwise) three times to the first number of the combination (pass the first number of your combination two times, stopping on it the third time).
   
3. Turn the dial to the right (clockwise) two times to the second number of the combination (pass your second number once, stopping on it the second time).
   
4. Turn the dial to the left to the last number (stop the first time on your last number).
   
5. Insert the key; turn right.
   
6. 
   Pull on the key while it's in the lock to open the door.

3 Digit Combination Locks for Gun Safes
31-10-31

1. Turn the dial to zero.
   
2. Turn the dial to the left (counterclockwise) three times to the first number of the combination (pass the first number of your combination two times, stopping on it the third time).
   
3. Turn the dial to the right (clockwise) two times to the second number of the combination (pass your second number once, stopping on it the second time).
   
4. Turn the dial to the left to the last number (stop the first time on your last number).
   
5. 
   Pull the handle down; the door should open.

Electronic Locks
31-10-31

1. Insert the tubular key into the lock to the left of the key pad.
   
2. Turn the key all the way to the right until the plunger pops out.
   
3. Press the five-digit factory code. The green Proceed light will come on.
   
4. Pull the handle down; the door should open.

4 Digit Combination Lock
31-10-31-10

1. Turn the dial to zero.
   
2. Turn the dial to the left (counterclockwise) four times to the first number of the combination (pass the first number of your combination three times, stopping on it the fourth time).
   
3. Turn the dial to the right (clockwise) three times to the second number of the combination (pass your second number twice, stopping on it the third time).
   
4. Turn the dial to the left (counterclockwise) two times to the third number of the combination (pass the third number of your combination one time, stopping on it the second time).
   
5. Turn the dial to the right to the last number (stop the first time on your last number).
   
6. Pull the handle down; the door should open.

You can find more information about Sentry Safes at www.SentrySafeShop.com

Are you sure that you are turning the dial correctly? 3 Digit Combination Lock
31-10-31

1. NOTE: If your safe DOES NOT have a key, skip Step 3.
   
2. Turn the dial to zero.
   
3. Insert your key and turn it until the plunger pops out.
   
4. Turn the dial to the left (counterclockwise) three times to the first number of the combination (pass the first number of your combination two times, stopping on it the third time).
   
5. Turn the dial to the right (clockwise) two times to the second number of the combination (pass your second number once, stopping on it the second time).
   
6. Turn the dial to the left to the last number (stop the first time on your last number).
   
7. 
   Pull the handle down; the door should open.

3 Digit Combination Locks for Security Safes
31-10-31

1. Turn the dial to zero.
   
2. Turn the dial to the left (counterclockwise) three times to the first number of the combination (pass the first number of your combination two times, stopping on it the third time).
   
3. Turn the dial to the right (clockwise) two times to the second number of the combination (pass your second number once, stopping on it the second time).
   
4. Turn the dial to the left to the last number (stop the first time on your last number).
   
5. Insert the key; turn right.
   
6. 
   Pull on the key while it's in the lock to open the door.

3 Digit Combination Locks for Gun Safes
31-10-31

1. Turn the dial to zero.
   
2. Turn the dial to the left (counterclockwise) three times to the first number of the combination (pass the first number of your combination two times, stopping on it the third time).
   
3. Turn the dial to the right (clockwise) two times to the second number of the combination (pass your second number once, stopping on it the second time).
   
4. Turn the dial to the left to the last number (stop the first time on your last number).
   
5. 
   Pull the handle down; the door should open.

Electronic Locks
31-10-31

1. Insert the tubular key into the lock to the left of the key pad.
   
2. Turn the key all the way to the right until the plunger pops out.
   
3. Press the five-digit factory code. The green Proceed light will come on.
   
4. Pull the handle down; the door should open.

4 Digit Combination Lock
31-10-31-10

1. Turn the dial to zero.
   
2. Turn the dial to the left (counterclockwise) four times to the first number of the combination (pass the first number of your combination three times, stopping on it the fourth time).
   
3. Turn the dial to the right (clockwise) three times to the second number of the combination (pass your second number twice, stopping on it the third time).
   
4. Turn the dial to the left (counterclockwise) two times to the third number of the combination (pass the third number of your combination one time, stopping on it the second time).
   
5. Turn the dial to the right to the last number (stop the first time on your last number).
   
6. Pull the handle down; the door should open.

You can find more information about your Sentry Safe at www.SentrySafeShop.com

Yes there is a sequence:
0:00 Dial for fan/limit switch is at 70 deg position. Furnace is cold. I turn T-stat to 80 deg to start furnace.
1:00 Burner comes on and dial begins to move slowly up.
2:30 Dial at 140 deg and fan motor comes on. Dial never goes above 150 deg.
3:00 Burner turns off. Dial slowly moves back towards 90 deg.
4:45 Burner turns on and dial is at 110 deg.
4:50 Fan turns off with dial still at 110 deg.
5:30 Burner off. Dial at 120 deg.
6:15 Fan on. Dial at 140 deg. Burner is still off.
7:00 Burner on. Dial at 120 deg.
7:40 Burner off. Dial still at 120 deg.
8:30 Fan off with dial at 110 deg., and it quickly snaps back to the 80 deg. position.
8:30 plus, cycle continues.....

I have this exact same oven and this "feature" annoys me no end. To turn it off ... turn the clock dial to PAST the time that the timer dial shows. EG: If your timer dial is showing 6, turn the clock dial so that it rolls past 6 o'clock. This will pop out the timer dial and thus turn off the timer, allowing you to use the oven normally.

To stop accidentally pushing/turning that timer dial, I removed the knobs. Good luck.

If you have an issue with the SelectTech dumbbells of any kind, just contact the customer service phone number 1-800- BOWFLEX. All they require is a proof of purchase (receipt) to be sent in and they will send you any replacement parts free of charge. You do not need to send the old parts back first.

From the manual:

1. Press the MENU button to open the menu.
2. Turn the SET dial to select [SYSTEM] and press the
SET dial.
3. Turn the SET dial to select [T.ZONE/DST] and press
the SET dial.
4. Turn the SET dial to select the setting option that represents your time zone and press the SET dial. To adjust for daylight saving time, select the time zone with the * next to the area.
5. Turn the SET dial to select [D/TIME SET] and press
the SET dial. The year display starts to flash.
6. Turn the SET dial to select the year, and press the
SET dial.
• The next part of the display starts flashing.
• Set the month, day, hours and minutes in the same way.
7. Press the MENU button to close the menu and to
start the clock.

in process of dial removal, the dial was somehow jarred to cause some disassembly of the dial...look at the dial body clasps carefully