Question about Samsung HT-BD2R 7.1 Channel Blu-ray Home Theatre System Theater System

Open Question

AH41-01083A DSP NO AUDIO TO ALL AUDIO CHANNELS OUTPUTS NO AUDIO TO HDMI OUTPUT

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a docking device for connecting iphone with panasonic receiver


There are lots of docks, but they all connect via USB

https://www.google.ca/search?q=iphone+6+plus+dock+connector&rls=com.microsoft:en-CA:IE-ContextMenu&biw=1366&bih=643&source=lnms&tbm=isch&sa=X&ved=0ahUKEwjMh9Hpg97QAhVPVWMKHVosD3kQ_AUIBigB#tbm=isch&q=iphone+6+plus+dock

Your receiver only has s-video.

Total Harmonic Distortion 0.7% (6ohms) (at 20Hz-20kHz)
  • S-Video Inputs/Outputs 5 inputs, 1 output
  • Video Inputs/Outputs 5 inputs, 1 output
  • Video Rec Outputs 1 output (with S-Video)
  • Front Audio Inputs 1 input (S-Video)
  • Digital Inputs/Outputs 4 in (3 optical, 1 coaxial)
  • Audio Inputs/Outputs 6 in, 1 out
  • VIERA Linkā„¢ HDAVI Control 3
  • HDMI Input/Output 3 in, 1 out
  • Dimensions (H x W x D) 6 1/4'' x 16 15/16'' x 13 11/32''
  • Weight 11 lbs
    Panasonic SA BX500 AV Control Receiver with High Quality Amplifier Decoder...
  • Dec 05, 2016 | Panasonic Audio Players & Recorders

    2 Answers

    My cable box is hooked up but no signal can u tell me whats wrong


    If you hookup your TV directly to the coaxial cable, bypassing the cable-box, do you get a few channels? If so, then the coaxial cable is carrying a signal, which is good.

    How are you hooking the output from the cable-box to the input(s) on the TV? Coaxial output port on box to coaxial input port on TV?
    Red/blue/green "component" outputs on box to matching inputs on TV? Red/White audio outputs on box to red/white inputs on TV? HMDI output from box to HDMI input on TV?

    You have to "tell" the TV which of the inputs:
    * coaxial (with TV set to Channel 3 or 4)
    * component
    * HDMI
    to "listen" to.

    Oct 24, 2014 | Samsung PN60E6500 60-inch 3D Plasma TV

    1 Answer

    I need a manual for a sanyo DWM-3000.


    What outputs does the Sanyo have?
    Composite output? (Yellow, with RED/WHITE stereo audio)
    Component output? (Red/Blue/Green video with Red/White audio)
    HDMI output?
    Coax? (Audio & video combined)

    What inputs does the TV have?
    Coax?
    HDMI?
    Component?
    Composite?

    Feb 14, 2014 | Sanyo Televison & Video

    1 Answer

    Hdmi to component connection for surround sound


    Does you tv have an optical audio output? That would be the easiest way.

    Jan 07, 2013 | Marantz Sr8200 Thx Ex Surround Dolby...

    1 Answer

    How connect toshiba tv to samsung home cinema whit hdmi? i connect but still no sound. i want watch tv but listen in cinema sistem


    the hdmi jack on the tv is an INPUT jack, not an output. to use your reciever for tv sound, you have to find the audio output on the tv (most do not have an audio out, but some higher end tv's have a fiber-optic digital out, which may or may not be compatible with your surround sound reciever)

    if your tv does not have an audio out, the only way to get the tv sound into the styereo is to use a tuner box, like a cable box or satelite box. tuner boxes always have either hdmi or stereo audio outputs.

    to use hdmi with your surround sound, you are supposed to run HDMI OUTPUT from the tuner box or disk player into the HDMI INPUT of the stereo, and then run the HDMI OUTPUT of the stereo into the HDMI INPUT of the tv.

    Mar 12, 2011 | Audio Players & Recorders

    1 Answer

    When you connect the HDMI cable from the TV to the receiver, is the receiver to and the TV to work pr is some other connection needed?


    You can't connect your receiver to the television to get sound that way unless your television has an hdmi output. Your tv more than likely does not have an hdmi output. Those are hdmi inputs on your television. The way to connect the television to the receiver is to connect the red and white RCA outputs from the tv to the red and white RCA inputs on the receiver to get stereo sound. Now if your television has a digital audio out you might be able to get surround sound with connecting a fiber optic cable between the digital audio out of the tv and the digital audio in on the receiver, but this does not always work for all of the devices you have connected to your television.

    The way to go is to connect all of your devices to the television's inputs for video and directly to the receiver for sound. The devices are connected from their audio OUT to your receiver's audio IN.

    Feb 05, 2011 | Sony STR-DH510 5.1 Channels Receiver

    1 Answer

    I am about to receive an LG32LF4700 Freesat/HD TV If I disconnect the SKY Box and connect the TV direct to the Dish cable will I receive Freesat HD channels. Also can I connect an extra bedroom TV into the...


    Yes you can split the signal out from the back of the Freesat/HD (not the TV)to the second TV.
    Look what outputs are on the Freesat box - the RF (standard cable) output should go to the 2nd TV (TV set to CH3) and the a/v cables,HDMI or DVI cable should go to the new TV - Note:To receive HD the output from the Freesat should be either HDMI,DVI or Composite output (RGB video jacks) with red White for audio. If you have HDMI this is best - it also provides audio.

    Oct 28, 2009 | LG 42LC2D 42 in. LCD HDTV

    2 Answers

    I have a avr-5808CI, when I hook up my bluray player with hdmi cable the blu-ray says 7.1dts hd and my system only outputs 5.1 dolby. I know you need 7.1 analoge out but is my system so obsolete. Is there...


    no way to upgrade your pre-amp, but you can just use some simple little RCA Y-Splitters on the rear outputs to essentially give you 4 rear outputs to your amp like with 7.1.

    however, true 7.1 each signal is unique.

    at some point when it comes time to upgrade, check out Outlaw Audio. They make killer stuff at factory direct prices.

    http://www.outlawaudio.com/products/990.html

    Feb 27, 2009 | Audio Players & Recorders

    1 Answer

    I need a diagram of how to hook up my jvc 5.1 surround sound to my tv, dvd and cable box


    I my self don't have that exact unit, but most are similar, and i have looked up the specifications which are:

    Inputs:
    1 x S-video input
    1 x Composite Video Inputs
    1 x Digital Audio (TOSLINK) Input
    1 x Stereo Audio Input

    Outputs:


    document.write(neg_specification_newline('1 x S-Video Output
    1 x HDMI Output')1 x S-Video Output
    1 x HDMI Output
    INPUTS (coming from devices to the system):
    1) The unit already comes with a DVD player, correct? If so you don't need to connect it. If you do, connect your DVD play via an s-video input, since a normal DVD player doesn't need a higher quality/resolution input.

    2) Connect your cable box to the home theater system via a composite cable (the one with Red green blue), if it has composite outputs ofcourse. If not, do it visa versa with the DVD, if your dvd has composite. So make the dvd via composite and cable box via s-video.

    3) Audio from the dvd, this would be via Digital Audio (TOSLINK) Input or stereo audio input. the digial audio will give you true 5.1 surround sound, and the stereo will only give you left and right channels, like you would hear from anything else (like a normal cd, radio, etc).

    4) audio from cable box, would be again depending what you want. If you cable provider gives you alot of programming that has 5.1 surround sound (mostly HD channels), you would be better off with the digital audio. But if you watch more via your DVD, then connect the cable box via the stereo input. Again, this is to your preference, and which one you want true 5.1 surround sound from. The system should be able to 'emulate' 5.1 surround sound via the stereo cable too, but if your watching a movie, it can't really tell if a sound is supposed to come from the left rear or the left front.

    Output:
    5)connect to tv via HDMI if available, or S-video.

    HDMI is much higher resolution (HD quality) S-video is normal cable programing or 'dvd quality'.

    And the Tv would be left on mute or volume=0 since no audio is connected to the tv! All the audio should now come from your system.

    Sorry if this was too vauge, but I don't have the same system and dont know exactly what/where all the connections are. If you have any other questions let me know.

    Feb 26, 2009 | JVC THD-50 System

    Not finding what you are looking for?
    Samsung HT-BD2R 7.1 Channel Blu-ray Home Theatre System Theater System Logo

    Related Topics:

    31 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Samsung Audio Players & Recorders Experts

    The Knight
    The Knight

    Level 3 Expert

    76173 Answers

    Marvin
    Marvin

    Level 3 Expert

    85216 Answers

    Cindy Wells

    Level 3 Expert

    6048 Answers

    Are you a Samsung Audio Player and Recorder Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...