Integra DTR-5.6, no sound for am/fm tuner

Help here

https://www.google.com/search?q=integra+dtr+5.3+goes+into+protect+mode

..

if there is smoking near it then it needs to be professionally cleaned

Does the vu meter show anything(bars moving up and down when audio is present?If so you may have a blown fuse or bad IC in the amplifier section causing the problem. If there is no indication of audio on the front panel it would be a Microprocessor problem

You will have defective output transistors

You will have a defective processor pcb. You may want to see if you can get Integra to give you a one time repair on this.

is it set properly for that input? does it play on the tuner setting? check the connecting cable for breaks..

You have a defective processor pcb assembly and it must be changed.

NO sound at all? That would be odd as its internal FM receiver is independent of any user connections. I'd work on getting FM to work first, then move on to more complex issues.

The manual is here:

http://www.retrevo.com/support/Integra-DTR-6.6-Receivers-manual/id/550ag000/t/2/

To reset the AV receiver to its factory defaults, turn it on and, while holding down the [Video 1] button, press the [Standby/On] button. "Clear" will appear on the display and the AV receiver will enter Standby mode.

I have the same problem! Could you fix it

Turns out it had to do with one of the settings for the new Blu-Ray player.
Thanks anyway.