I Bought This Truck That Has A Uniden Supernet RD 35 In It. The Problem Is That I Don't Know How To Operate It. Can You Help ?

Try Uniden website
https://www.google.com/search?q=Uniden+RD+35+user+manual

..

Read the manual mate??

What is the problem, Don;t operate at night or without light, test make simulator with one lamp directly and other in a box close.
And review the specifications and modes to use this cam

You can download a copy of the manual at
http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/DXAI5588-2om.pdf

The remote operation instructions begin on page 46.
You can reset your PIN# by following the instructions on page 35.

Your phone's owner manual can be downloaded from this location.
Hope you are able to sort your problems out soon.
Anyway, please, let me know if I can help you out any further.
Regards, Carlos

I have a link to the instruction manual just look for your model.

YOU COULD HAVE BAD FUEL OR AIR GETTING INTO FUEL SUPPLY SYSTEM.

It may be old technology, but honestly, the radar guns still emit the same signals that these radar detectors look for to alert you. Newer detectors may have a little better sensitivity and better anti-falsing technology, but basically there isn't much difference between one made in 1980 and one made today. (Kind of like an AM radio)

I have the manual for the RD55 as well as the unit, brackets and original box. It works great, I just have no need for it anymore. If anyone is interested, make me an offer. [email protected]

If your trying to establish a loopback for the Data Terminal Equipment, you seem to have satisfied the RTS/CTS, DTR/DSR loopback. At the V.35 end of your cable, you need to loopback the SD (balanced pairs) to the RD (balanced pairs), as well as insure that you have a valid clock source. Usually the DCE provides clock on a balanced pair SCT, SCR. towards the DTE. But, when you build a loopback cable or adapter, you can obtain clock from the DTE via the SCTE pair and tie it to the SCT and SCR balanced pairs. A lot of the requirements depend upon the DTE and DCE equipment your testing. Hope this helps...