HP PSC 1610 All-In-One - Memory card Error

You need to import the photos to your PC to view them. There are two ways to do so: connecting a camera directly to the computer via USB (Universal Serial Bus) cable and by using a flash memory reader. Using the flash memory reader is considered the fastest method to transfer images. Some of the popular types of flash memory card readers are Secure Digital (SD), Compact Flash (CF), Memory Stick (MS), Multimedia Card (MMC) and Smart Media (SM). Here is how you can use the reader to view photos from your digital camera.

If using the Card Reader -

The HP all-in-one has detected an error with the memory card.

1. More than one memory card is inserted in the HP all-in-one.

2. An incompatible camera is connected through the camera port.

3. A memory card is inserted and a digital camera is connected at the same time.

Solution:

Remove and reinsert the memory card. It may be inserted incorrectly. If the problem continues, the memory card may be defective.

Remove one of the memory cards. Only one memory card can be used at a time.

Check the user guide that came with the camera to see if it supports PictBridge. If it does not, try using the cable that came with the camera to connect the camera to the USB port on the back of the HP all-in-one instead of to the HP all-in-one camera port. If the camera does support PictBridge, make sure the camera is set to PictBridge mode. See the user guide that came with the camera for instructions on how to do this.
Remove the memory card or disconnect the camera. Only one can be used at a time.

You might try the following - Reformat the memory card in the camera or format the memory card in a Windows XP computer by selecting the FAT format.
Hope this helps!

Could be it only supports SD cards up to 2gb but not SDHC.

Usually the memory cards fit in with a push. But if you push them further in one more time, they are ejected. Do let me know if that worked or not. Otherwise I will search for some other step.

it does't go true when i hit print

Try a full NVM reset on the unit and check
Reset Steps are.
Unplug the power cord from the unit when there is still power in the All-In-One and press and hold the # and No 9 Button without releasing the buttons plugg the power cable back, it should come up with a message as reset
If the screen go's blank after you connect power cable, then release the keys and turn the power On, it will come up with a message as Full NVM Reset

Good Luck

Hi,

HP printers only reads only 1 gb memory cards.
For further information.
Click on the web link given below.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00265347&cc=us&lc=en&dlc=en&product=390315

Have a great day!

There is no way to do that since the internal memory is designed to only output to cards, not the other way around. Fortunately, this should not be a problem.

In general, the best way to transfer photos to your computer is to use a card reader - it provides a standard interface that the computer will recognize, it saves wear and tear on the camera, and it saves batteries.

I use Meritline.com for things like this because they are cheap and reliable, but please don't think there aren't hundreds of other places to get one from.

To help you, here is a link to the page at Meritline that lists card readers. Note that many have free shipping:

http://meritline.com/readers.html

This is a relatively cheap one with free shipping that will handle just about any card form factor except compact flash:

http://meritline.com/all-in-one-card-reader-black-transparence.html

Good luck.

Hi , reinstall the printer driver with sd inserted.

if the card bigge rthen 2 gb ?