The only way to get a replacement button is with the whole kit. They are available for $8.99 here plus shipping. with a new system you can put another receiver in another room to hear it better!
http://www.warepark.zoovy.com/product/GE2?meta=FRG&utm_source=GBASE&utm_medium=CPC&utm_content=&utm_campaign=
Hi there. I think I have the same GE chime. It has a series of 4 dip
switches on the bell (base) and also in the switch unit. Just make them
the same. On mine for example, switch # 1,2 & 4 are up (on) and #3
is down (off). Any combination of 16 codes should work as long as both
units are the same. Just as an aside, I had a problem with mine working
intermittently, then mostly not at all. It was the actual pushbutton
switch inside the button unit. Luckily, I replaced the micro-switch and
it's working again. Also during cold wet weather, the 12v battery gets
depleted faster than normal probably due to moisture inside the switch
unit. I taped a piece of plastic from a sandwich bag over the switch
unit to help keep water out.
I hope this helps...
76 views
Usually answered in minutes!
Hi Wiz,
Thanks for your reply,I have no problem seting up the dips. This unit comes with two pushbuttons,I have a third door I wanted to cover with another pushbutton,but I can't locate another one.I wanted to ask you if you had any idea where I could obtain one.
Thank You.
Earl.
Thanks Wiz.
I've been trying for quite some time to get an answer. Yes I will order a new unit.
Thank You
Earl
×