Re: my timex watch is not right because the time is 24...
Select Time reset button (right lower side) until seconds flash
Select Start button on face and cycle through until 24-HR
Select Lap/Reset
Select Time reset button
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There are several models of your watch not all of which appear to have a 12/24 hour display format.
Try this extract from a manual; press the MODE button six times to enter the 12/24 adjusting setting and then use the START/STOP or SPLIT/RESET button to change the time.
Press the mode button to return to normal operation.
To use 12- or 24-hour time for your watch, please follow the instructions below.
1. Press and hold the "Set" button for 2 seconds. The "Set" button is on the lower right side.
2. Press the "Date Advance" button on the upper right side. This will reset the seconds.
3.
Press the "Change Mode" button on the lower left to set the hour. The
hour will flash. Press the "Date Advance" button until the correct hour
is displayed.
4. Press the "Change Mode" button again to set
the correct 10s unit (first digit 1 or 0) for the minutes. Press the
"Date Advance" button until the correct first digit of the minutes is
displayed. Repeat this step to set the second digit of the minutes.
5.
Repeat Steps 1 through 4 of this section to set the year, month, date
and day and whether to use 12- or 24-hour time for your watch.
6. When finished, press the "Set" button (on the lower right) to return to the current time view and lock in your settings.
Thank you for contacting FixYa.<br />
<ol id="ecxintelliTxt">
<li id="ecxjsArticleStep1">
Press the "MODE" button---usually on the lower left side of the watch, but sometimes on the right center side---to cycle through to the time display.<br /></li>
<li id="ecxjsArticleStep2">
Press and hold the "SET" button---usually on the right lower side of the watch---until the seconds flash.<br /></li>
<li id="ecxjsArticleStep3">
Press "MODE" repeatedly to cycle through the displays that flash: from hours to minutes to month to date and day. At the end of the cycle is the hour display option. Make this option flash.<br /></li>
<li id="ecxjsArticleStep4">
Press the "SPLIT/RESET" button below the face of the watch to change the hour display option to "24-hour display." This is the same as military time. If there is a "NEXT" button on the upper-right side of the watch, use this to advance to the 24-hour option instead of using the "SPLIT/RESET" button. You may need to press a "START/SPLIT" button instead a "SPLIT/RESET" button to cycle between 12- and 24-hour display. The "START/SPLIT" button could be located below the watch face or on the upper-right side of the watch, depending on the model.<br /></li>
<li id="ecxjsArticleStep5">
Press the "SET" button again. You are now done. All PM hours should be displaying hours between 12 and 23.<br /></li></ol>
Contact TIMEX for further assistance at:<br />
http://www.timex.com/info/Product_Instruction_Guides_Downloads
To change between 12 & 24 hour display, press the mode button (bottom left) and then the bottom right button to change format. Press mode until normal display is achieved.
To set the digital time and date on your Timex, please follow the steps below.
Timex Digital Watch
1. Press and hold the "Set" button for 2 seconds. The "Set" button is on the lower right side.
2. Press the "Date Advance" button on the upper right side. This will reset the seconds.
3. Press the "Change Mode" button on the lower left to set the hour. The hour will flash. Press the "Date Advance" button until the correct hour is displayed.
4. Press the "Change Mode" button again to set the correct 10s unit (first digit 1 or 0) for the minutes. Press the "Date Advance" button until the correct first digit of the minutes is displayed. Repeat this step to set the second digit of the minutes.
5. Repeat Steps 1 through 4 of this section to set the year, month, date and day and whether to use 12- or 24-hour time for your watch.
6. When finished, press the "Set" button (on the lower right) to return to the current time view and lock in your settings.
To use 12- or 24-hour time for your watch, please follow the instructions below.
1. Press and hold the "Set" button for 2 seconds. The "Set" button is on the lower right side.
2. Press the "Date Advance" button on the upper right side. This will reset the seconds.
3. Press the "Change Mode" button on the lower left to set the hour. The hour will flash. Press the "Date Advance" button until the correct hour is displayed.
4. Press the "Change Mode" button again to set the correct 10s unit (first digit 1 or 0) for the minutes. Press the "Date Advance" button until the correct first digit of the minutes is displayed. Repeat this step to set the second digit of the minutes.
5. Repeat Steps 1 through 4 of this section to set the year, month, date and day and whether to use 12- or 24-hour time for your watch.
6. When finished, press the "Set" button (on the lower right) to return to the current time view and lock in your settings.
If your set up is: Top-Left=Indiglo Top-Right=St./Stop Bottom-Left=Mode Bottom-Right=Lap/Reset
Than follow these steps: 1. Press Lap/Reset and hold. You should see the time the alarm was set for. 2. While holding Lap/Reset, press Mode. 3. Let go of all buttons. 4. There you go!
NOTE: 12/24 HOUR TIME IS SELECTED BY PRESSINGRESET/LIGHT ONLY WHEN THE HOURS MARKER IS FLASHING. THE “A” OR “P” WILL DISAPPEAR WHEN THE WATCH IS SET TO 24-HOUR TIME.
Press Set - hold (top Left button)
-When the sec start flashing go to the bottom left button
press it 3 times
-When the hour flashes press the bottom right button 1 time
-Press the top left 1 once with
×