At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
My fisher paykel of 6 years or so will not rinse or spin. It agitates but will not spin the clothes? I have only tried what my book says which is virtually nothing and that is what it is doing too? Help--I have a teenage daughter who washes alot of clothes.
I have the fisher paykel eco smart washer and dryer. the washer will washer but will not pump the water out and will not spin, the pump was also leaking a little. It starts to let the water out but after just 5 seconds it stops dead. mine is 3 years old and have extended warrenty. called them to repair it, that was 9 days ago. they have not received the pump from fisher paykel yet. they called them and fisher paykel don't know where the order went. fisher paykel don't even know how it was shipped or the traceing number. I have 5 people here and need my washer. Might I add mine is a GWL11 I have the fisher paykel eco smart washer and dryer. the washer will washer but will not pump the water out and will not spin, the pump was also leaking a little. It starts to let the water out but after just 5 seconds it stops dead. mine is 3 years old and have extended warrenty. called them to repair it, that was 9 days ago. they have not received the pump from fisher paykel yet. they called them and fisher paykel don't know where the order went. fisher paykel don't even know how it was shipped or the traceing number. I have 5 people here and need my washer. Might I add mine is a GWL11
You can't post conmments that contain an email address.
The drain pump is jammed. Switch off and remove the plug from the wall socket. Tilt the machine back so you can look under it. On the right you will see a motor which looks like it is upside down. This is your drain pump. Remove the wiring harness from the pump and turn the pump clockwise while pulling back the little white plastic clip which holds the pump in place. Clean thoroughly and replace pump.
This worked for us! We were able to clear this pump and now it works just fine. Thanks so much for posting this. It saved us an expensive visit from a repair man. This made my day today! THANK YOU!This worked for us! We were able to clear this pump and now it works just fine. Thanks so much for posting this. It saved us an expensive visit from a repair man. This made my day today! THANK YOU!
You can't post conmments that contain an email address.
This is great it works and saves a $100 service call. I will be doing this about every 3 years as a maintenance item. Just one note to clarify things.
After pressing the little white clip, you have to twist the whole motor assembly COUNTER clockwise about a 1/4 turn. It then will pull straight out. You will see a mouse-sized ball of fuzz that has knocked itself together and is plugging the drain. Just pull the fuzz out. Then put everything back the way it was before. Be sure the motor assembly is correctly and fully twisted back into place; otherwise, it won't be completely sealed and you will have a water leak.
I had nothing behind the pump but I removed the hoses as well and found a penny lodged in there..removed it and it worked perfect! ThanksI had nothing behind the pump but I removed the hoses as well and found a penny lodged in there..removed it and it worked perfect! Thanks
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Push power button and start button together, push water level up than push start button, turn machine off at wall and unplug it, plug back in and start machine as usual, that may fix the problem, if not, suspect the ECU board is faulty
there could be something stuck in the machine between the two bowls. lifting the lid, removing the ring, agitator and inner bowl will easily check this. if the machine has become loud on spin, and the leak is actually from the bottom (more likely) then it could need seals and bearings replaced. don't run it too much more while leaking, electricity and water don't mix XD
Unscrew the agitator and wipe out all accumulated muck. Screw agitator back on, and put through a rinse cycle with white vinegar and bicarbonate soda. This will flush any residual scum. You may have to repeat procedure every 6 months.
Does It just shake bowl left & right, it will soon give you fault code 56.
Well its a board problem you will need to get technician to fix this board, three resistors(R129,R130,R131) need to be changed for a 1MegOhm resistor.
This problem will often occur with a light load of clothes. The beeping is usually the unbalanced load alarm. Often, redistributing the clothes around the agitator and moving the agitator manually up and down and side to side to center it again will fix the problem. You may need to advance a new cycle to where it spins out to empty the washer and run the laundry again.
Hi just read your posting.Unless the machine shows an error code the diagnostic mode will not help.Does the machine agitate in the wash cycle?Does the machine drain the water completely?Does the machine spin the clothes dry.Please reply with additional information on the questions I have posted and I am sure I can help you rectify this fault.Looking forward to your reply.
will not drain or spin
I have the fisher paykel eco smart washer and dryer. the washer will washer but will not pump the water out and will not spin, the pump was also leaking a little. It starts to let the water out but after just 5 seconds it stops dead. mine is 3 years old and have extended warrenty. called them to repair it, that was 9 days ago. they have not received the pump from fisher paykel yet. they called them and fisher paykel don't know where the order went. fisher paykel don't even know how it was shipped or the traceing number. I have 5 people here and need my washer. Might I add mine is a GWL11
×