Can't get normal color in video mode.

Advanced: Color Accent To Shoot with Only One Accent Color (the rest in black and white): Turn the mode dial to SCN. Use the arrow directional pad to select Color Accent. User Guide Press SET to edit the accent color. Point the window at the accent color and press the left arrow on the directional pad to set the accent color.

Check the right strap lug and make sure it is tight. This model has a history of one or both of the strap lugs screws coming out and shorting out various parts of the circuit.

Yes, you can bypass parking break feature by connecting the corresponding wire of BV8962 to ground, also you could add a 3 pin toggle switch to get a normal and bypass mode switch, this can be wired of this way, the common pin of toggle switch to your video unit, at the other pin, it could be connected the parking break wire (normal mode) and the remaining one to ground (bypass mode).

Issue: How do I reset the camera to its default settings?
Solution: Procedure for resetting the camera to its default settings PowerShot SD750 and SD1000.

Resetting Settings to Their Default Values - PowerShot SD750 and SD1000. 1. Turn on the camera and press the <MENU> button to open the menu. 2. Using the button, highlight the yellow (Set up) tab. 3. Using the button, select [Reset All..] and press . 4. Select [OK] and press .

• Settings cannot be reset when the camera is connected to a computer or to a printer.
• The following cannot be reset:
• • Shooting mode
  • The [Date/Time], [Language] and [Video System] options in the (Set up) menu
  • White balance data recorded with the custom white balance function
  • Colors specified in the [Color Accent] or [Color Swap] modes of My Colors
  • Newly added My Camera settings

Hi,
Please follow the steps below to reset the setting to default...

1. Turn on the camera and press the <MENU> button to open the menu. 2. Using the button, highlight the yellow (Set up) tab. 3. Using the button, select [Reset All..] and press . 4. Select [OK] and press .

• Settings cannot be reset when the camera is connected to a computer or to a printer.
• The following cannot be reset:
• • Shooting mode
  • The [Date/Time], [Language] and [Video System] options in the (Set up) menu
  • White balance data recorded with the custom white balance function
  • Colors specified in the [Color Accent] or [Color Swap] modes of My Colors
  • Newly added My Camera settings

This is “Digital IXUS 110 IS” manual.
(”Powershot SD 960 IS” is “Digital IXUS 110 IS” in Europe)
hxxp://files.canon-europe.com/files/soft32659/manual/IXUS110is_CUG_EN.pdf
[Changing the Color and Shooting] : page 88 ~ 90
*Color Accent & Color Swap

Turn the dial next to the screen to the right until it goes away (the one with the func. set button in the middle)

With camera dial on video, rotate the scroll wheel located around the direction button until Standard is selected. DO NOT push function set first like the manual says.

Color Accent:

• enter this mode
• point to a color you'd like to highlight
• press Menu
• shoot
  

This will be the only color, all other colors will now be shades of gray.

Color Swap:

• enter this mode;
• camera will ask you to input Original and New colors;
• use Up and Down to select how loose/precise color selection needs to be;
• point camera to something with Original color and press Left
• point camera to something with New color and press Right
  
• shoot
  

Everything with the Original color will be shown with the New color.

Both of these procedures are described in the Advanced User Guide, pages 59-63 ( http://gdlp01.c-wss.com/gds/0900001430/PSSD600IXUS60CUGad-EN.pdf )

turn off the color and see if you have a good grey picture if not your grey scale is off and requires adjustment