Can you assist with the issue of my Whirlpool Duet Electric Dryer not getting hot. It spins and the vents out are clean.
Here are the source codes that pop up on the dryer with the "fix" PF Power failure "PF" flashes to indicate that a power failure occurred while the dryer was running. Press HOLD TO START to continue the cycle, or press OFF/Pause to clear the display. E1 Thermistor open Replace thermistor if found defective E2 Thermistor shorted Replace thermistor if found defective
Hi
Press and Hold the End of Cycle Signal Button for 15
seconds, this will unlock the control lock of your Whirlpool Duet. Hope this
helps...please post back for further assistance.
Daniel
962 views
Usually answered in minutes!
There are no codes popping up, no errors, the dryer just does not get hot?
my dryer does not dry. It takes 3 hrs to dry 10 towels
My dryer stopped heating as well. I was told I need to replace the heating element. I have ordered one and will let you know if this fixes the problem
receiving code f1 and dryer will not work
×